<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by kuruption1983:
by the way, the car is off, but the RPM stands @ 1, because of the friction between the face and the needle, but thats no problem, otherwise is works perfectly when its more than 1 RPM, just doesnt go down to 0 ,,!! <hr></blockquote><p>I had the same problem. I have the regular indiglo gauges and my needle would stick at about 3500 RPM. Just make sure it's flat when you replace the screws that hold them on. Pull it tight.
~Ryan~
1994 MX-3 GS Teal
Stock V6 with insane potential
1987 Toyota Pickup
SR5 Xtracab Turbo
--The slow wait until the green light, while the FAST already left when the red went out--
--Sex should be like driving a Honda....slow, obscene, and loud enough for the neighbors to hear--
Hey guys - can y'all help me out for a second...<p>If I purchased these beautiful gauges, I would install them myself, because my car isnt registered and there are no shops here that will do it....<p>What would happen if I was to just put the gauge faces on, but not hook up all the wires, would they work like normal gauges, just with white faces?<p>Would I be able to install them without having to worry about calibrating needles and sh*t? Could I just install them by slipping the gauge faces around the needles?<p>Any advice would be great! Thanks!
um ok are those the ones from corksport same ones?
I was looking at some at speedhut and they have a little knob that will change the colour thats kinda ghey imo! Do those ones come with a knob or just always that colour? Oh yea and are there ones you can get where the needle will light up as well?<p>[ February 18, 2003: Message edited by: Justin_83 ]</p>
---------------------------
Finally a fellow MX-3er!!!!
Euro Tails (Clear Lense)
OEM RS Spoiler
Indiglo Guages
5000V Blue Ground Effects
---------------------------
ok, here are your answerz,
these ones are only available on ebay and from ebay sellers' sites,,,
They come with a knob that just changes the brightness,,,
Also needles do NOT light up on any MX3, unless you make one yourself,,, and No, you cant get these at corksport, these are alot cheaper and IMO look better,,,
I wish this answers it all,,,
I found this StreetRacing company that does Indiglo Reverse gauges. They don't have our car, but they have a developement department that are willing to make one. The other gauges look like the picture above, but has an equal amount of red to blue. They charge the same as Corksport-$69. But are red/blue, not green?blue. All they need is a cluster, which I have an extra, and 20 people willing to buy one. If your interested, go to StreetRacerParts.com to check it out. You would be buying it from them, if there were any questions. What do you guys think?