New MX Body Kit
-
- Regular Member
- Posts: 846
- Joined: October 19th, 2002, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: New MX Body Kit
I think it looks awsome but needs a grill inbetween the lights like the MP5 kit, and maybe some more pizaz (for lack of a cooler word) in the big mouth opening. <p>The grill should look more like this<p>
Mods:
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
Re: New MX Body Kit
Hey man nice job!
I'd be down for that front end assuming I got money by the time they go into production.
I'd be down for that front end assuming I got money by the time they go into production.
93 GS, KLZE, KL31 ECU, Centerforce Stg 3 Clutch, 2.25" Exhaust w/Flowmaster muffler, OBX Headers, Pheno Spacers, Front & rear X-drilled/slotted Rotors, KVR pads, SS brake & clutch lines, Ractive Filter, H&R Springs, Tokico Blue Struts, 8mm Accel Wires, MSD 6A w/ Blaster 2 Coil, HVAC Indiglo Panel. *Sold*
06 Eclipse GT *Sold*
08 Evo X GSR *Current*
06 Eclipse GT *Sold*
08 Evo X GSR *Current*
Re: New MX Body Kit
...or side vents like this...excuse the source of the image. have a laugh while your at it.
You still can't touch my car!!!
Re: New MX Body Kit
Yea, I do like those vents better then the triangle.
My Cardomain Site<p><p> FBSS Air suspension, 12 gallon tank, viair 450 comp
-
- Regular Member
- Posts: 311
- Joined: August 23rd, 2002, 2:01 am
- Location: Kitchener, Ontario Canada
- Contact:
Re: New MX Body Kit
you should make a how-to<p>i wanna get into a project like this in the spring<p>ive used fiberglass but havnet really tried anything this big before. Any pointers or websites that could put me on the right track?<p>it looks sick by the way
nice and simple
nice and simple
NoVa<p>
- airjordon_09
- Regular Member
- Posts: 1041
- Joined: September 16th, 2002, 2:01 am
- Location: B.C. / ONT
- Contact:
Re: New MX Body Kit
not me, i like the triangle, its time to be different, as we have seen there are many cars with the box like vents, the tri-angles are different
-
- Regular Member
- Posts: 115
- Joined: November 20th, 2002, 2:01 am
- Location: Newfoundland
- Contact:
Re: New MX Body Kit
you should design some fenders and a hood too... not enough options for the mx
Re: New MX Body Kit
Don't worry man, by the time i'm done, we'll have everything possible for this car!
My Cardomain Site<p><p> FBSS Air suspension, 12 gallon tank, viair 450 comp
Re: New MX Body Kit
looks pretty nice. i think i may buy one when you have them for sale, if they don't look as much like the pakfeifer one as they do now.
- millionflame
- Regular Member
- Posts: 960
- Joined: March 4th, 2002, 2:01 am
- Location: Van Island, BC
- Contact:
Re: New MX Body Kit
What size are you making the fog light holes???<p>~A
~ Millionflame (94 GS 120K)
Re: New MX Body Kit
I've already talk to u steve about this, but .... I sooooooo wanna see a wide body kit for the mx-3 that would be soooo sweeeeet!<p>oh yeah, the front looks good , ....yous got some mad skillz bro, definetly cool<p>lates
Derek Van Horne MX-3.com Member # 33
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4
94 MX-3 Silver Stone Metallic CAR is SOLD
Car Domain Web page MX-3
Car Domain Web page SRT-4
Re: New MX Body Kit
The round holes are 6 1/2 inches diameter, they could be used for foglights or left empty.
My Cardomain Site<p><p> FBSS Air suspension, 12 gallon tank, viair 450 comp
-
- Senior Member
- Posts: 2030
- Joined: February 3rd, 2002, 2:01 am
- Location: Toronto, Ontario, Canada
- Contact:
Re: New MX Body Kit
no comment of the front,
but would someone plz make M3 like fenders,,, they will look sick on MX3s,,,
A friend just graduaded from ryerson, he does crazy custom car designs, actually one of his designs was in the import-tuner magazine, it was a crazy designed >97 prelude which he designed on autocad and later went into production in japan,,
he designed a sick IS300 kit,, which i will try to turn it from autocad file into a jpg and post it here,,,,
but would someone plz make M3 like fenders,,, they will look sick on MX3s,,,
A friend just graduaded from ryerson, he does crazy custom car designs, actually one of his designs was in the import-tuner magazine, it was a crazy designed >97 prelude which he designed on autocad and later went into production in japan,,
he designed a sick IS300 kit,, which i will try to turn it from autocad file into a jpg and post it here,,,,
Re: New MX Body Kit
i like the idea but i would like to see a front bumper that is more rounded off at the bottom.....for example the onderground one has to two things stickin out on the sides of it....seems pointless. A rounded off front bumper can still maintain a look of AGGRESSIVENESS.<p>just like that mx3 that has that custom bumper that u used for ur example.<p>anywayz hope it works all out
pEace
pEace
-
- Senior Member
- Posts: 2030
- Joined: February 3rd, 2002, 2:01 am
- Location: Toronto, Ontario, Canada
- Contact:
Re: New MX Body Kit
its a 12 meg autocad file, nevamind the IS300 i talked about!!
but hey, these are the sickest off-shelf kits i eva seen,,,
but hey, these are the sickest off-shelf kits i eva seen,,,