need headers

[Legato626]

Well i am planing on geting my hole exhaust system i am looking for some good headers that would work good with magnaflow exhaust. The exhaust is going to be with a high-flow cat and a 5" SS muffler with damper and i am useing 2.25" pipeing (becuase the muffler doesnt come in 2.5"....). But ya i am just looking on what would be a good set of header and where could i get them?

[TsiMiata]

Your only option is to use headers for the probe/mx-3. Hotshot and OBX are the two bands most people use. I think pacesetter and bosal make them also. The pacesetters are garbage from everything I have heard.

[Legato626]

Is there certent headers off probes becuase i found 2 sets but i am not shere if they will work or not.

http://hotshot.com/hotshotheaders/fm3050.html

http://hotshot.com/hotshotheaders/fm3051.html

Would eather one or just one of these work for a mx-3 GS 1.8L DOHC?

[mxmaz]

Yes those work i think the cat just has to be moved back a little bit. I would think you will be getting a high flow cat put on the same time anyway. The first ones you would want on a 94. I think the 96 ones are for obd2 (someone correct me if im wrong)

<small>[ November 09, 2004, 08:56 PM: Message edited by: mxmaz ]</small>

[mxmaz]

also i would recommend you buy these obx ones (hotshot knock-offs) just cause they are half the price.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7933016371&category=33631&sspagename=WDVW

[Legato626]

o sweet thanks man, ya that price was making me twitch =).

[Legato626]

hey do i still need a cat for these headers or is that just part of the pipe?

[TsiMiata]

you'll need a cat also. The stock cat won't bolt up to the headers. I got a magnaflow/carsound one of ebay for ~$80. You'll need a shop to weld flanges on the cat and shorten up the catback to make everything work.