KF15 ECU
Re: KF15 ECU
there is an ecu on ebay right now called KF01. Would this be for the KFZe or can you just use the KF15? Heres the ebay item
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7915011579&category=33596
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7915011579&category=33596
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: KF15 ECU
i would think one is for auto and one for manual KF-ZE motors but either one is for the KF
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Re: KF15 ECU
I was reading another post on the KF01 ecu on a kfze and he was having trouble but its not clear weather the computer was causing the trouble. Anybody know if the kf01 will cause problems, my car is manuel trans.
- papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: KF15 ECU
i just saw a auction on ebay with kfze, tranny and uncut engine wiring harness and its a kf01 and auto tranny
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
-
- Senior Member
- Posts: 3825
- Joined: June 26th, 2003, 2:01 am
- Location: Puyallup, WA
Re: KF15 ECU
KF01 is automatic. KF15 is the ticket. Only thing I can think if need ASAP is contact some engine importers and see which ones also import ECU's.Originally posted by papa roached:
i just saw a auction on ebay with kfze, tranny and uncut engine wiring harness and its a kf01 and auto tranny
Re: KF15 ECU
im pretty sure i still have a jdm kf-15 ecu. i got it by accident when i bought the klze. so if u still need one let me know
Re: KF15 ECU
hey Cosmo I pm'd you.
Re: KF15 ECU
How do you test an ecu to see if its working? is there a way to seee if it works before you put it in? (might sound like a dumb question but i dont have a clue about any of that stuff)
Re: KF15 ECU
There are 59 pins used on the K8 ECU. Five are ground, the rest are signals, of which seven are ATX only. Many of the control signals are computed from several inputs. Without an automatic test set, you can imagine the problem.
There are companies which specialise in ECU repair, who will have the gear. I think that's the only practical way of getting a clean bill of health for an ECU, other than putting it into a car you know is running well.
There are companies which specialise in ECU repair, who will have the gear. I think that's the only practical way of getting a clean bill of health for an ECU, other than putting it into a car you know is running well.
Re-shaped and re-sized gearshift lever. Best driveability mod you can do!
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system![Smile :)](./images/smilies/icon_smile.gif)
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system
![Smile :)](./images/smilies/icon_smile.gif)