BEST2500$ EVER SPENT

V6 Technical/Performance Discussions
Post Reply
Qalex
Junior Member
Posts: 24
Joined: October 7th, 2003, 2:01 am
Location: utah

BEST2500$ EVER SPENT

Post by Qalex »

my motor is fiin and is off the hook, it consists of klze, kl31 ecu,hotshot headers, clutchmasters stage 1, 2.25exhaust straight off headers no cat, ngk plugs and wires,shaved k8 flywheel and resurfaced, new water pump , belts, fluids,etc...altogether $2500 including removal and install of the two motors. All in all its one fast mo fo!!!!!!!!!!!!!
klze, ze ecu, hotshot headers,2.5 exhaust, custom cai, plugs, wires,intrax lowering springs, crossdrilled rotors,eclipse deck with in dash 6 disc, 2 12inch jlw3, u.s. amp vlx25, and fosgate door speakers
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Re: BEST2500$ EVER SPENT

Post by papa roached »

sweet, sounds about what mine will be
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
TsiMiata
Regular Member
Posts: 1074
Joined: July 30th, 2003, 2:01 am
Location: Cape Cod, MA
Contact:

Re: BEST2500$ EVER SPENT

Post by TsiMiata »

How were the hotshots to put on? I've got a set waiting for my KLZE- which I should pick up this week.
93 MX-3 GS- ZE, KL31 ECU, Fidanza Flywheel, CM Stage 2-R clutch, Hotshot Headers

99 Subaru Impreza RS, the new toy

91 Eagle Talon Tsi AWD *RIP*
User avatar
mitmaks
Senior Member
Posts: 8704
Joined: September 10th, 2001, 2:01 am
antispam: ~SPAM*SUX~
Location: Spokane, WA
Contact:

Re: BEST2500$ EVER SPENT

Post by mitmaks »

post some pics please, i wanna see that little "tuner" gonna get it dynoed soon?
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
Image
Qalex
Junior Member
Posts: 24
Joined: October 7th, 2003, 2:01 am
Location: utah

Re: BEST2500$ EVER SPENT

Post by Qalex »

hopefully the dyno is coming soon as well as some 1/4 mile times . first gonna play with timing and fuel to see if i cant get more response especially through 2nd gear, its a little weaker in the top end then 1st and 3rd but still strong nonethelessany ideas out there and what has helped ne one?
klze, ze ecu, hotshot headers,2.5 exhaust, custom cai, plugs, wires,intrax lowering springs, crossdrilled rotors,eclipse deck with in dash 6 disc, 2 12inch jlw3, u.s. amp vlx25, and fosgate door speakers
Qalex
Junior Member
Posts: 24
Joined: October 7th, 2003, 2:01 am
Location: utah

Re: BEST2500$ EVER SPENT

Post by Qalex »

as far the hotshot headers the are probably the second best thing i bought next to the klze, i ran open headers for about two days and they were way too loud for the street so i hooked them up today to the exhaust with no cat just straight piped from front to back!SOUNDS AND PERFORMS GREAT
klze, ze ecu, hotshot headers,2.5 exhaust, custom cai, plugs, wires,intrax lowering springs, crossdrilled rotors,eclipse deck with in dash 6 disc, 2 12inch jlw3, u.s. amp vlx25, and fosgate door speakers
Post Reply

Return to “V6 Technical/Performance”