Exhaust?

V6 Technical/Performance Discussions
Post Reply
User avatar
Ricksmx3
Supporting Member
Posts: 578
Joined: February 18th, 2004, 2:01 am
Location: Asheville North Carolina

Exhaust?

Post by Ricksmx3 »

I am just about ready to put an exhaust on my 92 gs 5 speed v6. What i need to know is what would you guys suggest i put on it? I dont want it to sound like a weed eater but i dont want it to sound to much like an old mustang or anything like that i just want a good pure racing sound. Any suggestions?
2010 MazdaSpeed 3
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Re: Exhaust?

Post by babyblueMX3 »

Originally posted by Ricksmx3:
I am just about ready to put an exhaust on my 92 gs 5 speed v6. What i need to know is what would you guys suggest i put on it? I dont want it to sound like a weed eater but i dont want it to sound to much like an old mustang or anything like that i just want a good pure racing sound. Any suggestions?
are you looking for performance here?.if so go with 2.25 piping...and I have 2.25 piping with a hi flow cat and ractive muffler...don't think i could have a better sound than that :shrug:
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
User avatar
Ricksmx3
Supporting Member
Posts: 578
Joined: February 18th, 2004, 2:01 am
Location: Asheville North Carolina

Re: Exhaust?

Post by Ricksmx3 »

Yeah i was looking for a little bit more performance. And How much does it cost to get all of this done? If i asked for the 2.25 pipeing with a hi flow cat and ractive muffler?
2010 MazdaSpeed 3
Machelski65
Regular Member
Posts: 269
Joined: July 20th, 2002, 2:01 am
Location: Hemlock,Michigan -USA-

Re: Exhaust?

Post by Machelski65 »

I got a Ractive axle back bolt on. All stainless steel, seamless welds, and 4 inch tip. I just put that on all rest is stock, it bolted right up, and sounds awesome. Like on above couldn't get better sound. I got mine used and got good deal. New I think they run damn near $300 for the axle back. This set up is definitely worth every dolla of it tho. Just my 2 cents, Good luck A.J.

<small>[ February 19, 2004, 07:55 PM: Message edited by: Machelski65 ]</small>
advantiracing
Regular Member
Posts: 111
Joined: October 28th, 2003, 2:01 am
Location: richmond hill
Contact:

Re: Exhaust?

Post by advantiracing »

I got a custom Magnaflo installed with 2.5inch piping with a high-flo cat and no resinator... and i woulndt trade it for anything.. i love the way it ripps at 5000 +... amazing
K8- MP5 kit Midnight Black -

http://www.cardomain.com/memberpage/560405
User avatar
Ricksmx3
Supporting Member
Posts: 578
Joined: February 18th, 2004, 2:01 am
Location: Asheville North Carolina

Re: Exhaust?

Post by Ricksmx3 »

Is there any system that i dont have to get custom fitted? Cause i know that it cost money to get it fitted. I just want one that will make it sound a little bit meaner. I dont really care if it adds power but i would like it to.
2010 MazdaSpeed 3
advantiracing
Regular Member
Posts: 111
Joined: October 28th, 2003, 2:01 am
Location: richmond hill
Contact:

Re: Exhaust?

Post by advantiracing »

it doesnt take much to make a custom.. i had mine done in an hour total
K8- MP5 kit Midnight Black -

http://www.cardomain.com/memberpage/560405
User avatar
Ricksmx3
Supporting Member
Posts: 578
Joined: February 18th, 2004, 2:01 am
Location: Asheville North Carolina

Re: Exhaust?

Post by Ricksmx3 »

What did it caost you?
2010 MazdaSpeed 3
Post Reply

Return to “V6 Technical/Performance”