will the 2.3L supercharged millenia S motor work?
-
BucktownMx3
- Regular Member
- Posts: 470
- Joined: January 14th, 2003, 2:01 am
- Location: Fayetteville, NC
- Contact:
will the 2.3L supercharged millenia S motor work?
hey guys i met someone who had a stock supercharged and intercooled millenia(s). Will that 2.3L motor work in our cars? cuz it seems to have the same kinda motor mounts, it has the supercharger already on it and 2 small 10" by 6" by 3" intercoolers on it. Id love to have thta kinda motor in my car but will it work? and if so how much would i have to modifiy?
94 mx3 gs (sold)
92 Mitsubishi Eclipse GSX(14.3 @ 99.08- almost completely stock)
92 Mitsubishi Eclipse GSX(14.3 @ 99.08- almost completely stock)
-
Mnemonic
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Re: will the 2.3L supercharged millenia S motor work?
no one reallly knows yet cause no one has done it, some will say yes some will say no, i believe it will but your gonna have a height problem being its higher than any of the k series engine
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
-
gsrbomb
- Regular Member
- Posts: 38
- Joined: March 10th, 2003, 2:01 am
- Location: Chicoutimi, québec, Canada.
Re: will the 2.3L supercharged millenia S motor work?
Non it will not fit for sure.
-1994 GS ENTIRELY STOCK, BUT NOT FOR LONG!-
Re: will the 2.3L supercharged millenia S motor work?
ok I have a question related to it. What family of motors is it related to?
-
papa roached
- Senior Member
- Posts: 2761
- Joined: December 10th, 2002, 2:01 am
- Location: Montgomery, WVa
Re: will the 2.3L supercharged millenia S motor work?
k series, supposedly had to move the intake ports further apart from each other
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
-
Custommx3
- Site Administrator
- Posts: 8391
- Joined: November 7th, 2000, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Lat 35.1N Lon -90W
- Contact:
Re: will the 2.3L supercharged millenia S motor work?
it was designed for economy, you'll have issues upping the boost too.
Re: will the 2.3L supercharged millenia S motor work?
It has 210 hp and 210 ft-lbs torque. Enough for me.
Re-shaped and re-sized gearshift lever. Best driveability mod you can do!
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system
-
Tyler17rose
- Regular Member
- Posts: 846
- Joined: October 19th, 2002, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: will the 2.3L supercharged millenia S motor work?
If it does bolt right in (i think it would) you'd have to have some sort of hood scoop so the hood could clear the taller intake manifold (assuming it is actually taller) also the ECU may not connect up perfectly. Who knows. I'd like to see someone try it. If the motor mounts are the same its worth a shot. It just may turn out to be alot more work then a KLZE swap.
Mods:
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
-
BucktownMx3
- Regular Member
- Posts: 470
- Joined: January 14th, 2003, 2:01 am
- Location: Fayetteville, NC
- Contact:
Re: will the 2.3L supercharged millenia S motor work?
will the supercharger and intercoolers work on either the 2.5 or 1.8?(i know it might take a lil bit of work) but could they be fitted without to much frustration?
94 mx3 gs (sold)
92 Mitsubishi Eclipse GSX(14.3 @ 99.08- almost completely stock)
92 Mitsubishi Eclipse GSX(14.3 @ 99.08- almost completely stock)
-
curtklze
- Regular Member
- Posts: 1749
- Joined: April 17th, 2002, 2:01 am
- Location: Okotoks, Alberta Canada
- Contact:
Re: will the 2.3L supercharged millenia S motor work?
yah it will work.
go for it.
go for it.
DONT SHIP WITH UPS!!! DIE UPS DIE!!!!!
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.
Re: will the 2.3L supercharged millenia S motor work?
It says above (and I've seen it elsewhere) that the intake ports on the KJ are further apart to take the supercharger, so it can't be fitted to a KL or K8. I don't know how they achieve this (taller block and conrods?)Originally posted by BucktownMx3:
will the supercharger and intercoolers work on either the 2.5 or 1.8?(i know it might take a lil bit of work) but could they be fitted without to much frustration?
Btw, the KJ ECU is ATX only.
<small>[ February 09, 2004, 05:52 AM: Message edited by: IanL ]</small>
Re-shaped and re-sized gearshift lever. Best driveability mod you can do!
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system
-
Custommx3
- Site Administrator
- Posts: 8391
- Joined: November 7th, 2000, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Lat 35.1N Lon -90W
- Contact:
Re: will the 2.3L supercharged millenia S motor work?
The S/C and Im will NOT work on anything but the KJ engine. You have to use the KJ heads, and they will not work with any other K series engine.
Re: will the 2.3L supercharged millenia S motor work?
More details on the KJ at the foot of this article including some dyno data.
It sounds like the air/air intercoolers are not very effective. Now if you could find space for water/air intercoolers.......
<small>[ February 10, 2004, 08:49 AM: Message edited by: IanL ]</small>
It sounds like the air/air intercoolers are not very effective. Now if you could find space for water/air intercoolers.......
<small>[ February 10, 2004, 08:49 AM: Message edited by: IanL ]</small>
Re-shaped and re-sized gearshift lever. Best driveability mod you can do!
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system
Extra thick soundproofing in the boot (trunk) to quieten my stainless steel exhaust system
-
timpronk
- Regular Member
- Posts: 603
- Joined: August 2nd, 2001, 2:01 am
- Location: Brantford, Ontario, Canada
- Contact:
Re: will the 2.3L supercharged millenia S motor work?
And here is a cutaway
<img src="http://plaza.ufl.edu/mugen23/images/KJ/ ... utaway.jpg" alt=" - " />
<img src="http://plaza.ufl.edu/mugen23/images/KJ/ ... utaway.jpg" alt=" - " />
92 MX-3 GS 2.5 KLZE
14.385 @ 98.21
14.385 @ 98.21