need help with mallory ignition
need help with mallory ignition
i just got a mallory 6a ignition and would like to know if anyone has a step by step installation on this. ive seen the msd ones but not all the wires match up and i dont wanna mess anything up. also, im not goin with an external coil yet cause all i need right now is an ignition. when i have the extra money, ill buy the coil. my car isnt running without it so any help would be great or if someone knows where theres a step by step installation on the mx.
93' Mx-3 GS, repainted laguna blue with pearl, 18 inch wheels (white) with Falcon ZE512 ruppers, custom headers with 2 1/4 inch exhaust, ported TB and intake manifold, ACT clutch, and ground-control coil-overs.
Re: need help with mallory ignition
anyones input would be great...
and Pat, i im'ed ya, the only thing i dont get is were does the extra white wire come from and the splicing of that same wire and a red wire into the original connector that connects to the disty (the one that gets replaced with the black, orange, and white wires...
and Pat, i im'ed ya, the only thing i dont get is were does the extra white wire come from and the splicing of that same wire and a red wire into the original connector that connects to the disty (the one that gets replaced with the black, orange, and white wires...
93' Mx-3 GS, repainted laguna blue with pearl, 18 inch wheels (white) with Falcon ZE512 ruppers, custom headers with 2 1/4 inch exhaust, ported TB and intake manifold, ACT clutch, and ground-control coil-overs.
Re: need help with mallory ignition
well, ill just try lookin through past threads to find the faqs
its probably been posted 100 times or more...
its probably been posted 100 times or more...
93' Mx-3 GS, repainted laguna blue with pearl, 18 inch wheels (white) with Falcon ZE512 ruppers, custom headers with 2 1/4 inch exhaust, ported TB and intake manifold, ACT clutch, and ground-control coil-overs.