When I fitted my KLZe a few months ago there was a label on one of the spark plug leads titled "compression value in bar". The numbers on the 6 cylinders are 39, 41, 42, 39, 40 and 41. I have no idea what these mean in PSI as I know that a KLZe in good condition should be around 200 psi.
Has anyone any idea what 40 bar means?
thnx
Compression on KLZE
-
- Regular Member
- Posts: 733
- Joined: January 16th, 2001, 2:01 am
- Location: Niagara Falls, Canada
- Contact:
Re: Compression on KLZE
http://www.chromatography.co.uk/Techniqs/Other/Pressure.htm
found this
<small>[ January 04, 2004, 09:18 PM: Message edited by: killerpickle ]</small>
found this
<small>[ January 04, 2004, 09:18 PM: Message edited by: killerpickle ]</small>
Tom Alexander
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
Re: Compression on KLZE
Thanks Tom - that's why I am confused as there is no way that a KLZE can have a pressure of 580 psi which is what 40 bar is! The tag on my engine was computer generated and says "Iveka" and "75417 Muhlacker"?