MSD Igntion gains on N/A?

Gro Harlem · Post by **Gro Harlem** » January 1st, 2004, 12:32 am

an ingition module will greatly improve throttle response, and maybe increase power by 1-2 on a dyno, which is negligible. They only increase power on turbo cars and highly tuned NA cars. I think some probe guys saw a 4whp gain with one installed on their KLZE powered cars, but on a K8 i wouldn't expect much.

tical · Post by **tical** » January 1st, 2004, 2:58 pm

im gettin ready to receive a Mallory ignition from Corksport. how do those rate to you all. they said that it was better than MSD, also the Mallory ignition im gettin is digital...

let me know

Justin

chertel · Post by **chertel** » September 28th, 2005, 1:53 pm

where on the distributor do you plug in the external coil? Is it #6or 7?

babyblueMX3 · Post by **babyblueMX3** » September 28th, 2005, 3:43 pm

well IF you have a 7 plug then yes on number seven (wich will be written C for coil) those disty only came on klze's and on kfze's. If you don't have it you have to add a tower to your stock disty

chertel · Post by **chertel** » September 28th, 2005, 5:50 pm

I have a msd digital-6 plus ignition control box. Can I use this with my stock disty? I am adding an external blaster coil later. Is there a cap available for the stock disty with a tower on it already.

babyblueMX3 · Post by **babyblueMX3** » September 28th, 2005, 6:01 pm

ya from prd IIRC

bmwm3guy · Post by **bmwm3guy** » September 28th, 2005, 6:26 pm

babyblueMX3 wrote:ya from prd IIRC

yes sir, your right steve it is PRD. I have one sitting in my room waiting to be installed.

chertel · Post by **chertel** » September 28th, 2005, 6:33 pm

what is prd IIRC?

babyblueMX3 · Post by **babyblueMX3** » September 28th, 2005, 6:38 pm

PRD is the brand
and IIRC is short for If I Remember Correctly

chertel · Post by **chertel** » September 28th, 2005, 6:42 pm

thanx, found prd online. My other ? can I just install the msd ignition with the stock disty?

babyblueMX3 · Post by **babyblueMX3** » September 28th, 2005, 6:44 pm

yes you can..actually 99% of people here uses it with the msd 6a

chertel · Post by **chertel** » September 29th, 2005, 11:24 pm

where can I find an msd power tower for my disty cap? I checked msd online and they dont have one. the reason I ask is the prd modified cap is $67usd shipped.

vozaday2000 · Post by **vozaday2000** » September 29th, 2005, 11:38 pm

you have to build one yourself.

here is a manual by Gro

http://www.projectmazda.com/howto/hei/index.htm

its in the v6 faq

chertel · Post by **chertel** » September 30th, 2005, 12:01 am

I meant the red tower that comes with the 8.5mm msd coil wire. The part that you attach to the distributor cover. I read gro's mod on the v6 faq page and he said the power tower comes with the wire. thanx though.

vozaday2000 · Post by **vozaday2000** » September 30th, 2005, 12:13 am

i don't know where to get one and i may get shot down for suggesting this but you could probably break off the top of a sparkplug (its not hard, really, and it works good for cracking windows

) so you have the nipple and the porcline (white stuff, i think that is what it is called) and then attach it from there. it might look ugly but it should work. just a suggestion

MX-3.com

MSD Igntion gains on N/A?

Re: MSD Igntion gains on N/A?

Re: MSD Igntion gains on N/A?