KLZE for 700(US)

Mnemonic · Post by **Mnemonic** » September 15th, 2003, 4:59 pm

I was hiding this but since im getting my ZE this week (with hope) here you guys goJDM INCand here is the quote they gave me
Hello Brian, The JDM KLZE advertised on our website for $700.00 is just for the engine. We actually don’t have any JDM KLZE ecu, but your current ecu for your car will be compatible with this engine. Shipping to Atlanta Georgia will be $200.00 plus $60.00 for taxes and duties and border custom charges. Your total price for this engine will be $960.00 shipped to your door. Should you have any questions or concerns please do let us know. Thank you,JDM Team MemberJapan Domestic Motor Inc.Tel. 514.321.4449Fax 514.321.4446Montrealwww.japandomesticmotor.com

TsiMiata · Post by **TsiMiata** » September 15th, 2003, 5:32 pm

Ordered my engine from them friday. See this thread-
http://www.mx-3.com/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=15&t=003532Your stock ECU *WILL* not work. See the above thread on where to get an ECU.

Mnemonic · Post by **Mnemonic** » September 15th, 2003, 5:46 pm

yea i know it wont im either ordering a remapped or the ze ecu

curtklze · Post by **curtklze** » September 15th, 2003, 10:58 pm

trust me, DONT get a remapped ECU, buy a KL-31 from lazzey.

Zoso124 · Post by **Zoso124** » September 16th, 2003, 1:02 am

<blockquote>quote:<hr>
Your stock ECU *WILL* not work.[/QB]<hr></blockquote>Not true, it will work but not to its optimal performance. There are tons of ZE MX3's still running the K08 ECU.

memphisMX-3 · Post by **memphisMX-3** » September 16th, 2003, 1:18 am

<blockquote>quote:<hr>Originally posted by Zoso124:
Not true, it will work but not to its optimal performance. There are tons of ZE MX3's still running the K08 ECU.<hr></blockquote>I agree, My friend paul been running his for over a year now with a KL VAF. Even though its nt how its ment to run he still has ran a 14.8 in th quarter mile.

TsiMiata · Post by **TsiMiata** » September 16th, 2003, 9:08 am

Well it will work- but not work right. Why go through all the trouble of swapping the engine and then not put in the right ECU? If you spend $1k don't skimp on $150 for an ECU. If you run the K8 ECU you get crappy gas mileage, down on power and the VRIS points are all wrong. Thats almost as close to not working with it still working as you can get.

2RotorsNaDream · Post by **2RotorsNaDream** » September 17th, 2003, 1:48 am

That mans correct dammit! I agree 100% with TsiMiata why not spend an extra $200 at most to complete your whole engine package.

It just wont run right without it.

masonholmes · Post by **masonholmes** » September 17th, 2003, 11:45 pm

cause some of us skimp like a mofo trying to get the $$$ just to get the engine, and want to get the ECU later if possible. thank you for clearing this up for people Mike.

Nd4SpdSe · Post by **Nd4SpdSe** » September 18th, 2003, 12:01 am

man, i ran my k8 ecu and it ran soo rich, it ate a 1/4 tank just to work and back, it was sick, fortunately, my ZE ecu came in next dayi would not perfersonally recommend the k8 ecu on the ZE. If it ends up eating gas like mine did, the ZE ecu will pay for itself after a few weeks, considering how much it was gonna cost me in gas...I belive you can run a k8 ecu with the 2.5vaf pretty good, i cant quite remember, but in the end, its basicly the Ecu/Vaf combo[ September 17, 2003: Message edited by: Nd4SpdSe ]

millionflame · Post by **millionflame** » September 18th, 2003, 1:05 am

One thing I noticed on their website is that they have a crappy warranty.30 days on just the block and heads doesn't exactly sound like they expect them to last or be in good condition.Sounds like more of a miss than a hit.~A

Mnemonic · Post by **Mnemonic** » September 18th, 2003, 3:12 am

tons of importers have the same warranty but these are the chances you get with buying a use engine anyway.I am going through BJE a local importer here in atlanta i was just letting people know

TsiMiata · Post by **TsiMiata** » September 18th, 2003, 9:53 am

Warranty doesn't mean much to me. Usually by the time I have the motor to the point where it's ready to go in the car the warranties up anyway.

Nd4SpdSe · Post by **Nd4SpdSe** » September 18th, 2003, 9:55 am

my warranty was 3 months from EngineLand, my warranty was into 30 of the 90 das when i finally installed it, we stripped the engine to find out what else we needed and what exact parts to get, and went from there

millionflame · Post by **millionflame** » September 18th, 2003, 5:50 pm

Yeah, warranties on motors are stupid to begin with, I agree.You have to pay the shipping there and back anyways, so it's not even worth it.Either way, thanks for letting us know.~A

MX-3.com

KLZE for 700(US)

KLZE for 700(US)

Re: KLZE for 700(US)

Re: KLZE for 700(US)

Re: KLZE for 700(US)

Re: KLZE for 700(US)

Re: KLZE for 700(US)

Re: KLZE for 700(US)

Re: KLZE for 700(US)

Re: KLZE for 700(US)

Re: KLZE for 700(US)

Re: KLZE for 700(US)

Re: KLZE for 700(US)

Re: KLZE for 700(US)

Re: KLZE for 700(US)

Re: KLZE for 700(US)