drilled rotors
-
- Regular Member
- Posts: 49
- Joined: April 9th, 2003, 2:01 am
- Location: casper, wy elevation 5200 above sea level
drilled rotors
im getting drilled rotors but i seen a guy on here that had brembo's for the front and back but the only make it for the front how did he have them on all 4. also what are some good brands
-
- Regular Member
- Posts: 49
- Joined: April 9th, 2003, 2:01 am
- Location: casper, wy elevation 5200 above sea level
Re: drilled rotors
also if i get the underdrive pulley for my 1.8 can i put it on my 2.5 klze when i get it
Re: drilled rotors
i also have the same question about the rear rotors. i check there website and they only list for the front rotors.
-
- Regular Member
- Posts: 389
- Joined: March 16th, 2003, 2:01 am
- Location: Newark, DE, USA
- Contact:
Re: drilled rotors
You can buy solid Brembos for the front and rear and have them slotted, drilled and/or cadmium plated. That's how most of the drilled/slotted Brembos are done. Only recently has Brembo started producing the drilled rotors for non-exotic cars.
-
- Regular Member
- Posts: 1161
- Joined: January 14th, 2003, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: drilled rotors
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by slow one:
also if i get the underdrive pulley for my 1.8 can i put it on my 2.5 klze when i get it<hr></blockquote>
yes. the engine blocks and most componants are all the same size on the outside. It's mostly the guts that are bigger and better.
also if i get the underdrive pulley for my 1.8 can i put it on my 2.5 klze when i get it<hr></blockquote>
yes. the engine blocks and most componants are all the same size on the outside. It's mostly the guts that are bigger and better.
http://members.cardomain.com/spydie
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."