could someone identify this please?

V6 Technical/Performance Discussions
Post Reply
killerpickle
Regular Member
Posts: 733
Joined: January 16th, 2001, 2:01 am
Location: Niagara Falls, Canada
Contact:

could someone identify this please?

Post by killerpickle »

I think its the water pump...and it has a bit of antifreeze on the outide of it (not good)<p>I always thought the water pump was under the car...but ....<p>Its the black thing under the hoses...i've circledImage
Tom Alexander
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
mzdspd
Regular Member
Posts: 823
Joined: May 11th, 2002, 2:01 am
Location: USA
Contact:

Re: could someone identify this please?

Post by mzdspd »

thats def not the water pump. water pump is on the lower half of the front of the block. that looks like u r refering to the engine mount.
David Coleman
Senior Member
Posts: 2516
Joined: November 7th, 2000, 2:01 am
Location: Gainesville, FL USA
Contact:

Re: could someone identify this please?

Post by David Coleman »

The black thing below those hoses could be the engine mount. The water pump is in that area also. Check the online shop manual for more detailed information, chapter B2.
David Coleman
I used to know alot about MX-3's, but not so much anymore. Oh well.
dennisvs
Regular Member
Posts: 111
Joined: January 6th, 2003, 2:01 am
Location: The Netherlands
Contact:

Re: could someone identify this please?

Post by dennisvs »

It is hard to see were you point at.
Do you mean between the hoses ?
David is right, on that point is also a engine mount.
and the waterpump is realy close.
On the sight of the engine where you marked the hose there you find the waterpump
Btw: do you have airco on your car?<p>check this link: http://206.47.151.194/webpage/mx6_specs.html<p>[ March 15, 2003: Message edited by: leiden ]<p>[ March 15, 2003: Message edited by: leiden ]<p>[ March 15, 2003: Message edited by: leiden ]</p>
killerpickle
Regular Member
Posts: 733
Joined: January 16th, 2001, 2:01 am
Location: Niagara Falls, Canada
Contact:

Re: could someone identify this please?

Post by killerpickle »

Okay using your link....<p>what is this green thing? I made it green because there seems to be a good amount of coolant over it....maybe a leak in the hose, or if its the water pump....<p>Image<p>[ March 16, 2003: Message edited by: killerpickle ]</p>
Tom Alexander
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
David Coleman
Senior Member
Posts: 2516
Joined: November 7th, 2000, 2:01 am
Location: Gainesville, FL USA
Contact:

Re: could someone identify this please?

Post by David Coleman »

Green thing is your motor mount. If there's coolant on it, that means the seals in your water pump have failed. Time to replace the pump with a remanufactured one, which usually runs around $50USD.
David Coleman
I used to know alot about MX-3's, but not so much anymore. Oh well.
mzdspd
Regular Member
Posts: 823
Joined: May 11th, 2002, 2:01 am
Location: USA
Contact:

Re: could someone identify this please?

Post by mzdspd »

i got a brand new water pump from advance auto parts for $55
Post Reply

Return to “V6 Technical/Performance”