power steering removed

aaronthehic · Post by **aaronthehic** » March 14th, 2003, 8:36 pm

on the weekend I removed the power steering belt and replaced it with belt #4030290 which is only a 3 cog ,grooved belt . It runs the belly of the belt on the tensioner pully and the pully titens in the oposite way but the power is very noticable. does anyone know if draining the system will help the steering?

curtklze · Post by **curtklze** » March 14th, 2003, 11:30 pm

so do you have no P/S belt now?what does the 3 cog belt you put on run, the alt?

aaronthehic · Post by **aaronthehic** » March 16th, 2003, 8:55 pm

It goes around the crank, water pump and tentioner pully

Hex3 · Post by **Hex3** » March 17th, 2003, 6:33 pm

alot of honda guys do the same mod but they dont have to get another belt they just take it off. They have a belt that runs from the Crank to the AC and then P/S. The only belt they have is the one to the Alt. (thats it)so they bypass both[ March 17, 2003: Message edited by: Hex3 ]

aaronthehic · Post by **aaronthehic** » March 17th, 2003, 8:16 pm

<blockquote>quote:<hr>Originally posted by XxAntwawnxX:
yes ive had the same thing done now for like half a year...belt never sliped off(i thoght it would) everthing still fine.<hr></blockquote>did you drain 1/2 the fluid out to make it easier to steer.

MX-3.com

power steering removed

power steering removed

Re: power steering removed

Re: power steering removed

Re: power steering removed

Re: power steering removed