What have u paid for your ze?
What have u paid for your ze?
the person i am getting my motor from can;t have it here till augest and i need it faster then that! i was gonna pay 2100 with curved neck, tranny and shipped<P>where have u gotten yours and for what proce if u don;t mind me asking?>
-
- Regular Member
- Posts: 67
- Joined: April 10th, 2002, 2:01 am
- Location: CATALONIA
Re: What have u paid for your ze?
have you looked the 850$ kl-ze post? we need people on the move really fast!!
BE FAST!!!
-
- Regular Member
- Posts: 315
- Joined: September 26th, 2001, 2:01 am
- Location: Guelph
Re: What have u paid for your ze?
I can get you one for 2000cdn when ever you like
Re: What have u paid for your ze?
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Smokin mx-3:<BR><STRONG>I can get you one for 2000cdn when ever you like</STRONG><HR></BLOCKQUOTE><BR>with lsd and the 1 with the intake manny 4 the mx
1993 MX-3 GS V6 - Stock
2004 MazdaSpeed MX-5
2004 RX-8 - Project
2004 MazdaSpeed MX-5
2004 RX-8 - Project
-
- Regular Member
- Posts: 1179
- Joined: August 27th, 2001, 2:01 am
- Location: Russellville, AR, USA
Re: What have u paid for your ze?
$1200 US, ebay
KLZE, ZE PCM, UR pulley, PS catback, PS STS, PRM, IAC bypass, 64mm TB, FOP hair gel
-
- Senior Member
- Posts: 2516
- Joined: November 7th, 2000, 2:01 am
- Location: Gainesville, FL USA
- Contact:
Re: What have u paid for your ze?
$1197 out the door with liftgate fee, <A HREF="http://www.noyanusa.com" TARGET=_blank>www.noyanusa.com</A>
David Coleman
I used to know alot about MX-3's, but not so much anymore. Oh well.
I used to know alot about MX-3's, but not so much anymore. Oh well.
-
- Regular Member
- Posts: 174
- Joined: March 6th, 2002, 2:01 am
- Location: Calgary, Alberta
- Contact:
Re: What have u paid for your ze?
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by ZUNE MX-3 Gs:<BR><STRONG>have you looked the 850$ kl-ze post? we need people on the move really fast!!</STRONG><HR></BLOCKQUOTE><P>Do you know when that is happening? And is it the one with the bent throtle neck?
<A HREF="http://www.spheregraphics.com/" TARGET=_blank></A>
Re: What have u paid for your ze?
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by David Coleman:<BR><STRONG>$1197 out the door with liftgate fee, <A HREF="http://www.noyanusa.com" TARGET=_blank>www.noyanusa.com</A></STRONG><HR></BLOCKQUOTE><P>thanks dave but i was getting the ze not the 03,
-
- Senior Member
- Posts: 2516
- Joined: November 7th, 2000, 2:01 am
- Location: Gainesville, FL USA
- Contact:
Re: What have u paid for your ze?
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Dj_Pawz_GS:<BR><STRONG><P>thanks dave but i was getting the ze not the 03,</STRONG><HR></BLOCKQUOTE><P>So am I...<P> [img]shrug.gif"%20border="0[/img]
David Coleman
I used to know alot about MX-3's, but not so much anymore. Oh well.
I used to know alot about MX-3's, but not so much anymore. Oh well.
-
- Regular Member
- Posts: 1073
- Joined: November 16th, 2000, 2:01 am
- Location: Toronto Canada
- Contact:
Re: What have u paid for your ze?
guys remember to do the US to Canadian dollar conversion
Re: What have u paid for your ze?
$2000 for engine, ecu, motor mount inserts, timing belt, water pump, spark plugs, wires, exhaust manifolds, drive belts, fluids and other crap ya need, i am doing all the work myself and am finishing tommorow, god i hope it starts!!!!! engine from swapjdm.com $1500 with shipping and curved IM
93 Mx-3 GS klze swapped(sold)
96 Integra LS DD
91 Crx Si drag car
2.0L sleeved gsr block, forged internals, skunk2 valvetrain, HP racing intake manifold, Holset H1 turbo, 1000cc injectors, short geared lsd transmission, 3" turboback exhaust. 20 psi
96 Integra LS DD
91 Crx Si drag car
2.0L sleeved gsr block, forged internals, skunk2 valvetrain, HP racing intake manifold, Holset H1 turbo, 1000cc injectors, short geared lsd transmission, 3" turboback exhaust. 20 psi
-
- Regular Member
- Posts: 67
- Joined: April 10th, 2002, 2:01 am
- Location: CATALONIA
Re: What have u paid for your ze?
I need one of them, so if anybody has a good offer or know a good source I will pick up one immediatly. I would prefeer the Ms-8 one for the manifold assembly issue, and of course, The ecu will be nedeed too. Please guys, be serious about this!
BE FAST!!!
Re: What have u paid for your ze?
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by David Coleman:<BR><STRONG><P>So am I...<P> [img]shrug.gif"%20border="0[/img]</STRONG><HR></BLOCKQUOTE><P>oh i couldn;t find any jdm motors on that page?
-
- Regular Member
- Posts: 736
- Joined: February 8th, 2002, 2:01 am
- Location: Toronto
Re: What have u paid for your ze?
The straight IM will fit the mx-3 if you relocate brake booster and battery. I believe more power can be extracted by the straight IM.
"A hero and a coward both feel fear but it is the hero who reacts first while the coward hides behind the hero"
-
- Regular Member
- Posts: 1749
- Joined: April 17th, 2002, 2:01 am
- Location: Okotoks, Alberta Canada
- Contact:
Re: What have u paid for your ze?
I paid 2600 for a curved neck ZE.<P>2250.00 CDN + 15% tax<BR>If you can get one with the trans as well go for it thats the best price I've seen.<P>now lets clear some things up.<P>1200.00 US= 1920.00CDN<BR>+shipping =2070<BR>+duty and tax=2380.00 CDN<P>when you post answers make sure you look at where the person is. Its no good telling a Canadian he paid to much because he got his for 2000CDN and you(an American) only paid 1200US. Plus isn't it worth 100.00 or 200.00 to get an engine from some one close, just in case there is a problem and you need to send it back. If you send it back YOU have to pay the shipping.
DONT SHIP WITH UPS!!! DIE UPS DIE!!!!!
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.
Yes, I AM a bastard
Here is my web site, I made this last year but didnt feel like shareing it untill now.
http://members.rogers.com/curts-klze/
How does this guy know so much?
He's a licenced BMW technician.