1.8L V6 Rev Limiter?

Travis83 · Post by **Travis83** » March 7th, 2002, 11:13 pm

Does the 1.8L V6 have a rev limiter? Thanks for your help.

pelado · Post by **pelado** » March 7th, 2002, 11:21 pm

that hasn't been asked for at least 2-3 hours

Travis83 · Post by **Travis83** » March 7th, 2002, 11:29 pm

well a**hole? does it?

white fish · Post by **white fish** » March 7th, 2002, 11:44 pm

YES I think its around 7200

Travis83 · Post by **Travis83** » March 8th, 2002, 12:22 am

Thanks you for taking the time to give me a real answer WHITE FISH. I really appreciate it.

zytariuk · Post by **zytariuk** » March 8th, 2002, 4:01 am

hehe, ya just got to learn to ignore the f---ing imature posts.

Guest · Post by **Guest** » March 8th, 2002, 5:46 am

i think its alittle higher possibally 7800-8000 cause when i auto-x i run on the rev limiter here and there but i don;t always get a good look at the tach so it could be 7200

pelado · Post by **pelado** » March 8th, 2002, 5:28 pm

That's spelled "immature." And it wasn't immature, it was sarcastic. I don't normally make those posts but I make an exception to posters that don't even bother to search the current page of posts, never mind the archives. That's right, a similar thread is on this page. Not the second or third page back, not the archives, this friggin' page. As far as being an a--hole, I concede that I am exactly that!

pelado · Post by **pelado** » March 8th, 2002, 11:10 pm

Just for a different point of reference here is a quoted response of a probetalk moderator to a poster asking that really tired question, "Where do I get a KLZE?". The poster got pissed off at those that made wiseass posts. The moderator closed the thread with this response:"So then you chose not to search before you posted this? There is a standing rule that you search before you post. Especially if you're just asking for opinion & such. While it is nice when people say, "If you would have searched you would have known ..." and then give you a link, it's not their job. You want to know something, you do the work. This is an encyclopedia if that's the way you want to see it. btw, if you would have searched you would have found A LOT more places than listed here to get a ZE. There's 4 places I'd get a ZE and only 1 is listed in this thread. Do yourself a favor and search."

Travis83 · Post by **Travis83** » March 8th, 2002, 11:36 pm

There is no need to be a jerk about it. I did look through the posts before I put this one. I didnt see a topic regarding a rev limiter. I just wanted some information. I dont understand why, if you know, you wouldnt just help me out. If someone asked a question that I knew, even if it was posted elsewhere, I would still answer it for them without being a jerk about it. So thanks for nothing PELATO.

pelado · Post by **pelado** » March 9th, 2002, 1:25 pm

That's just the difference between you and me. Nothing more, nothing less. If you want to get pissed off about a sarcastic post, that's your problem. It's also the risk you take when you post. You can't control me any more than I can control you. Get over it. Oh, by the way, a sure sign of immaturity is name calling.

vseved · Post by **vseved** » March 10th, 2002, 6:15 am

My V6 tops at 7600 rpms.

David Coleman · Post by **David Coleman** » March 10th, 2002, 11:27 am

Mine is at around 7800-7900 indicated on the stock tach. Post closed due to excessive kvetchingsearch key words: rev limit, rev limiter, fuel cut, max rpm.

MX-3.com

1.8L V6 Rev Limiter?

1.8L V6 Rev Limiter?

Re: 1.8L V6 Rev Limiter?

Re: 1.8L V6 Rev Limiter?

Re: 1.8L V6 Rev Limiter?

Re: 1.8L V6 Rev Limiter?

Re: 1.8L V6 Rev Limiter?

Re: 1.8L V6 Rev Limiter?

Re: 1.8L V6 Rev Limiter?

Re: 1.8L V6 Rev Limiter?

Re: 1.8L V6 Rev Limiter?

Re: 1.8L V6 Rev Limiter?

Re: 1.8L V6 Rev Limiter?

Re: 1.8L V6 Rev Limiter?