Distributor Problem
-
- Regular Member
- Posts: 1079
- Joined: February 13th, 2001, 2:01 am
- Location: Hartford, CT
- Contact:
Distributor Problem
Okay, i changed my distributor cap today, and i broke the pin that connects to it. Now my car stalls all the time....would i need a whole new distributor??
Re: Distributor Problem
what pin are you talking about?
92RedGS <BR>I'm Sorry, Officer, I didn't realize my radar detector wasn't plugged in. Say aren't you the guy from the Village People?
-
- Regular Member
- Posts: 1079
- Joined: February 13th, 2001, 2:01 am
- Location: Hartford, CT
- Contact:
Re: Distributor Problem
It's the pin that connects the distributor to the distributor cap...it looks like a little peice of plastic, maybe an inch long
Re: Distributor Problem
if your talking about the little plastic rotor with a copper t on the end and spins around in the Distributor cap, it pops off the distributor and is like $11.00 at napa auto parts. i replaced mine when i replaced my distributor and is easy to put on. just take the rotor up to a parts store so you get the right one.
92RedGS <BR>I'm Sorry, Officer, I didn't realize my radar detector wasn't plugged in. Say aren't you the guy from the Village People?
-
- Regular Member
- Posts: 1079
- Joined: February 13th, 2001, 2:01 am
- Location: Hartford, CT
- Contact:
Re: Distributor Problem
Nope, it's not the rotor, it's the part that the rotor snaps into. You know the little plastic pin that the distibutor cap connects to? THat's what i broke
-
- Regular Member
- Posts: 1079
- Joined: February 13th, 2001, 2:01 am
- Location: Hartford, CT
- Contact:
Re: Distributor Problem
So i reset my ECU and everything works fine now...weird $hit huh?