Pioneer mosfet Installation?
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
Pioneer mosfet Installation?
Hey guys, I need help installing my mosfet 50w x4 pioneer cd player. I got the rear conector but no harness ...doh! anywho, I recognize some wires, blue for the rem and red and black for power, other than that im lost heh. There are wires coming out of my car, can someone tell me wich ones are for power from the ign switchand ground? other than that, everything else is quite easy, but im stumbled by purple wires..green wires ..argh. Oh i just plan on putting the stereo like it should on the acc and ill run the speaker wires seperate. Oh and where does my radio get power to light up? any help appreciated
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
Re: Pioneer mosfet Installation?
First of all..get a wiring harness... for the love of mike get a wiring harness..they are $10.
As far as the wires go, there are a LOT of posts about them on this message board. Just do a search for stereo wiring.
Also if you want the quick way..
MX-3 page wiring info
As far as the wires go, there are a LOT of posts about them on this message board. Just do a search for stereo wiring.
Also if you want the quick way..
MX-3 page wiring info
- Typhoonk
- Regular Member
- Posts: 1138
- Joined: December 31st, 2002, 2:01 am
- Location: Bowmanville
- Contact:
Re: Pioneer mosfet Installation?
pay someone to do it.
-------------------------------------------------------
Got to sell one of my cars to cover the bills
2002 Mazda Protege 5 - Manual, Blue colour fully loaded
PM for info
Got to sell one of my cars to cover the bills
2002 Mazda Protege 5 - Manual, Blue colour fully loaded
PM for info
- Andrew_Pakula
- Senior Member
- Posts: 2362
- Joined: November 18th, 2000, 2:01 am
- Location: Toronto, Ontario, Canada
- Contact:
Re: Pioneer mosfet Installation?
Yea I agree, pay someone to do it.
Less hassle and they'll do it properly for you, offer them cash(no invoicing) and they might do it cheaper for you.
Less hassle and they'll do it properly for you, offer them cash(no invoicing) and they might do it cheaper for you.
Click here for Andrew's FIVE BUCKS Part-Out CLEARANCE!
My Former MX-3: http://www.zerokarma.com/mx-3/ - updated 10/10/2005
My New Ride: 2003 Lexus IS300 Intensa Blue Pearl, E-shift, Premium Package
My Former MX-3: http://www.zerokarma.com/mx-3/ - updated 10/10/2005
My New Ride: 2003 Lexus IS300 Intensa Blue Pearl, E-shift, Premium Package
-
- Junior Member
- Posts: 23
- Joined: August 1st, 2004, 2:01 am
- Location: Nova Scotia, Canada
Re: Pioneer mosfet Installation?
I put my new Clarion in w/o a wiring harness in about 45 min. no problems at all. And I used the wiring schematics from this site.....I've never put one in before and it wasn't hard at all!!
Give you something to do for and then you kow how to do it.
Give you something to do for and then you kow how to do it.
Aaron
96' 1.6 DOHC
96' 1.6 DOHC
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
Re: Pioneer mosfet Installation?
well i got a harness but im missing the factory harneses that come out of the car itself..bleh ill wire it without a a harness...where can I find those swchematics? anyone??
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
Re: Pioneer mosfet Installation?
Well I hope I can help. I just went & looked at mine. I have the original harness but I checked to see how it was wired up to the factory harness.
This is on the factory harness:
solid green wire & green with stripe are speaker
Grey with stripe & solid pink are speaker
Blue with white stripe & solid tan are speaker
Purple & blue with brown stripe are speaker
red, red with black stripe, blue, blue with black stripe all go to the harness. The aftermarket harness only has 3 wires coming out of it.
2 red & 1 orange.
Hope this helps. Any other questions feel free to ask I'll help any way possible.
This is on the factory harness:
solid green wire & green with stripe are speaker
Grey with stripe & solid pink are speaker
Blue with white stripe & solid tan are speaker
Purple & blue with brown stripe are speaker
red, red with black stripe, blue, blue with black stripe all go to the harness. The aftermarket harness only has 3 wires coming out of it.
2 red & 1 orange.
Hope this helps. Any other questions feel free to ask I'll help any way possible.
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
Re: Pioneer mosfet Installation?
thanks! I found out i only needed 3 wires to turn the baby on...other than that...the rest are speaker wires and rem..i cant believe i was gonna pay someone 65 dlls for a 5 minute job haha. thanks i guess that ebay harness isnt needed anymore lol.
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!