MX-3.com

so I think we all agree that unless your willing to get new spindles made up that you will have to cut away at least one of the tabs and drill. which is what I did anyways.
I don't know what models have what spindles but in my case it was a 94 eunos 30x with ABS and on the spindle it was marked R1 ...

cast iron is cast in sand the aluminium is just an option but if were going to go to all this bother then it might be worth looking into, and I'm told that 6061 is one of the hardest.
I'm in Australia so it wouldn't be as cost effective to get it done here but artist use foundry's all the time for ...

just a thought ,the major problem seems to be connecting the wilwood calipers to the spindle.
If enough people were interested then maybe we could get a PROPER spindle cast.
I did do metal casting when I was at uni so I know how its and a foundry where they do this sort of thing wouldn't have any ...

bumping a old thread cause i saw this.

will call them but meantime does anyone else know anything about them?

KONI YELLOW MX3

only one week left then I will be closing the group buy


I sent several emails to admin with regards to including this in the GB section but no responce.
so heres the link.

http://www.members.optusnet.com.au/zydawn26/bushes.htm

still had no response from admin so I decided to bump this

group buy will be ending at the end of the month so if you want in let me know.

I would also like to add that if you don't require the complete kit but just a couple of bushes let me know.
Providing I have the minimum order of 5 complete kits ,I might be able to combine postage with another member if they agree, to reduce cost on postage.

eg: maybe just sway bar bushes ...

heres a link for super pro bushes complete kit if it helps any one

http://www.members.optusnet.com.au/zydawn26/bushes.htm

tried to post in the gb section but couldnt.

hi
can someone help me out.
I need both left and right front steering knuckles for a 94 mx3 with abs.
down here in the land of oz I have to buy the hole strut which I don't need.
thanks

chech your distributer number first because there is atleast two types.

1997
definatly OBDII
don't do the transision fluid untill your freind gets back and she definatly says ok or you might be up for a new atx.

just do the filters ,plugs,wires and then if you would like to do more get the injectors cleaned and the O2 sensors replaced.

If you need some local help have ...

it is a 94 but in Australia so it may be different

my dizzy died on me last week and I had a spare so I got the car on the road again quickly but I am trying to convert my old ka34 dizzy to hei.
I have completly removed to coil which is a solid unit and has the 3 pin connector mounted to it but how do I disable the coil?

there are no wire track or ...

thought this was very intresting
would you have some more details like the part no's for the mx3?

Hi
I already have and external oil cooler but was thinking of adding an external oil filter.
would this reduce oil pressure?
can a engine oil filter be used?
full flow or partial?
has anyone done this and what have the results been?

thanks guys