MX-3.com

so the supercharger itself would fit, which is what I thought. I figured it would need modifactions to the rest of the setup of course to work. But it is a possibitly then to use this supercharger on a 2.5 setup.

will the millenia supercharger fit on the 2.5, it is stated that it will fit v6 and v8?<P>Also the millenia is a 2.3<BR>is the intake manifold from that engine the one that fits the kzle or does the millenia also come with a 2.5 non-supercharged which is where the proper intake manifold comes from?<...

The klze will pass emmisions in ontario and here is some proof.<P>KLZE tested on 13/11/2001<BR> limit reading<BR>cc ppm 89 4<BR>co% 0.50 0.01<BR>no ppm 684 490<BR>rpm 2845<P><BR>Here is what my 1.8 did in 1999<BR> limit reading<BR>cc ppm 89 75<BR>co% 0.50 0.14<BR>no ppm 684 314<BR>rpm 2134<P>so it a...

this is what I did <A HREF="http://home.golden.net/~timpronk/n-disty.shtml" TARGET=_blank>http://home.golden.net/~timpronk/n-disty.shtml</A> <P>I got the transistor and resistor from mazdaspeed Steve (thankyou)<P>hope this helps.

14.4 - 4 = 10.4<P>yeah that would require some tricks but I thought he said in the 13's that sounds ok to me if hes gettin slicks and some other stuff. But of course a scanned timeslip is always nice to see.

I may be going on saturday with a group called clubrex (crx's) and with my friend and his b16a civic and my mx3(klze). But I have to find out for sure yet if we can still register (procrastination) If we can still register than I will go on saturday. My friend helped start this club and the niagara ...

I am using the stock ze distributor with a crane cams cd ignition and an ps-92 external coil.<P>Did you get the part of the ze wiring harness on your distributor. If you did, this connector will have only 4 wires (the 1.8 or 2.5 disty will have more) You need to connect those four wires to a pn??? t...

looks mighty fine. <P>What program are you using... studiomax?

Bryce,<P>If your willing to take some payments id like to get those lights from ya.<P>Tim P.

A little collage of about the mx3<P><BR>

here is a dyno chart for a klze in a probe <P>172 hp 160 ft lbs. <A HREF="http://plaza.ufl.edu/mugen23/KL.htm" TARGET=_blank>http://plaza.ufl.edu/mugen23/KL.htm</A>

I purchased a Clutchmasters stage 1 from R-R racing. It shouldnt take 8 hrs to install if the tranny and engine are out of the car. <P>So far my clutch has worked great with my klze. I didnt want to spend to much either considering I bought it at the same time as my engine. But I am happy with my st...

I have a klze with a north american intake manifold, 1.8 vaf and ecu and mine idles fine. Originally it didnt. To fix it I checked all of my vacuum lines. Once those were hooked up correctly all of the memorized codes on my ecu disappeared (mostly the same codes you have pulled, oxygen sensors,no fe...

I just bought a rear caliper last weekend from the part source for 197 including core. After you return the old caliper it cost 107.00 cdn

Anyone have an msd ignition and coil they are selling. <P>if so gimme a holler at :<BR>timpronk@golden.net <A HREF="http://home.golden.net/~timpronk/n-mx3.shtml" TARGET=_blank>http://home.golden.net/~timpronk/n-mx3.shtml</A>