MX-3.com

What he means is you gotta put your car into diagnostic mode before you change the idle. There's a small box labeled "DIAGNOSTIC" near your brake's master cyl. Pop the top off and run a small wire from position "10" to "G" or ground. Then turn the idle screw to get the ...

I was having a problem with high idle and surging idle when I hit the brakes. I cleaned the tb and idle speed control valve (thanks to Tunes67 for the awesome write up in the FAQ) and re_adjusted the idle screw. Seems to have all but solved my problems. She finally idles perfect again. When you had ...

that's what I want to do... b6t swap with the stock intake manifold and head...

for just a regular cat back exhaust, I've always had best results with OBX racing. I am currently running a twin canister muffler (basically two mufflers side by side... looks a lot like the big fart cans with two tips). Very deep tone on my car as well as a couple of hondas that have a similar setu...

I like hondas for the reliability. They've been known to run just shy of 250,000 and still have the valve springs be within tolerence for clearance and spring rates. I can't name the magazine off the top of my head but just this month they posted a test on a B16A1 where they turboed one completely s...

I still have mine just hangin bro... I tried cappin it off and that wasn't the best idea... It's never given me problems... just leave it hang where it won't melt or suck h2o or anything...

Ok, so maybe cops abuse their power. They're human just like us. Tell me you've never told a lower ranking co-worker to do a crap job just cause you didn't want to do it. Everyone has abused their power at least once, from the work place to the school yard, it's just part of being human. Now, I'm no...

I totally agree, but it's something rather than nothing. I want to run it with the piggy back just to have an idea of where she's runnin at a glance. That's all.

broke 17 yo

More done to his car than mine... lol

Ok... I got my Autometer A/F guage installed this weekend and just wanted to know if I could compare it's readings to someone elses. I got a K/N filter on the intake hose and a cat back exhaust done to it so far. At WOT, it dances from about mid lean to the rich side of stoich under 3300-3500 rpm. A...

Ditto.... My 95 RS doesn't drop when I turn the car off.

So...... I was checkin my ecu for stored trouble codes (jumper wire to ten and ground) and thankfully didn't find any. I drove my car a couple hours later and it was running wierd. Still good, no spittin or spudderin, just wierd. Drove it for about 5 miles before I realized that I forgot to remove t...

.

The sohc cai puts the filter right in the fender near where the coolant overflow bottle is, correct?

.. However.. I am not familar with this.. Quote: I just performed the throttle body coolant line modification. While I was doing that, I took out that resenator that goes before the ISC valve, and just hooked up the shorter hose to that port The coolant line modification I found on here somewhere. ...

Wow... I want one too...