Search found 319 matches
- March 14th, 2005, 1:29 pm
- Forum: Suspension/Brakes/Wheels/Tires
- Topic: 500 bucks, what suspension setup!?
- Replies: 3
- Views: 233
I agree with gro harlem. That setup is probably one of the better ones I have seen with out spending a gross amound of money. Also, kudos to working the suspension before the motor. It's funny as shizzle when you see a car with a good amount of motor work get smoked because they can't even control t...
- March 14th, 2005, 1:22 pm
- Forum: 4-Cyl. Technical/Performance
- Topic: shifter is real tight
- Replies: 11
- Views: 551
I have a 95 rs and had similar issues when i installed my short shifter. First it was way too loose... every gear felt like neutral (thank you ebay :x ) so I put in a couple washers where the bottom of the shifter met the linkage. Apparantly I tightened it a little too much because it was too hard t...
- March 10th, 2005, 9:50 am
- Forum: 4-Cyl. Technical/Performance
- Topic: HEADERS
- Replies: 9
- Views: 403
http://www.cardomain.com/memberpage/552384/6 It's about half way down the page. Awesome information here. He doesn't show what he did about the egr tube on our exhaust manifold. What I will be doing and found several other people doing is just simply cappin off the bung for the egr tube on the heade...
- March 9th, 2005, 11:15 pm
- Forum: 4-Cyl. Technical/Performance
- Topic: HEADERS
- Replies: 9
- Views: 403
yeah... thats the one. just get an exhaust manifold gasket for your car and hold it against that header. you will see that there are two holes you will need to drill, and the inside of the 2nd and 3rd ports will need to be bored just a little bit. if you need an example i have a bookmark from a guy ...
- March 9th, 2005, 9:14 am
- Forum: 4-Cyl. Technical/Performance
- Topic: Intake manifold swap
- Replies: 9
- Views: 325
- March 9th, 2005, 1:02 am
- Forum: Forced Induction
- Topic: What NOS do people here favor?
- Replies: 2
- Views: 238
What NOS do people here favor?
Just curious about what Nitrous Oxide setups people here favor. I'm probably going to go with a wet shot around 50 or so. Does anyone have a favorite brand? Price definatly being a factor.
- March 9th, 2005, 12:57 am
- Forum: Suspension/Brakes/Wheels/Tires
- Topic: Stock vs. Plus Size Tire Weight List
- Replies: 5
- Views: 554
- March 9th, 2005, 12:54 am
- Forum: 4-Cyl. Technical/Performance
- Topic: Intake manifold swap
- Replies: 9
- Views: 325
- March 8th, 2005, 8:47 pm
- Forum: 4-Cyl. Technical/Performance
- Topic: HEADERS
- Replies: 9
- Views: 403
in my experience a header on a slightly modified 4 cyl is a good performance adder. as long as the exhaust piping isnt good big and kills back pressure, the turbulence reduction from a header is huge. i have seen gains across the board in quite a few vehicles. grey-mx3: personally i dont like the he...
- March 8th, 2005, 8:42 pm
- Forum: 4-Cyl. Technical/Performance
- Topic: Intake manifold swap
- Replies: 9
- Views: 325
the bp is a good swap, ill give it that. but my issue is that at least for now this is my only car. i cant do a motor swap and have it non driveable for so long. my other issue is dealing with vac lines crossed and wiring issues, so my plan is to use the block i have and pretty much convert it to th...
- March 8th, 2005, 10:21 am
- Forum: 4-Cyl. Technical/Performance
- Topic: Intake manifold swap
- Replies: 9
- Views: 325
Intake manifold swap
Hey, guys. Can't find much help on the search for this. I got a 95 rs with the stock dohc and want to know what intake manifolds bolt on. im thinkin the protege might be good cause I want to get a bigger throttle body as well (start bigger to bore bigger). will that manifold directly bolt on? I'm un...
- March 7th, 2005, 9:11 am
- Forum: Appearance
- Topic: Valve Cover
- Replies: 4
- Views: 477
i did mine with a high temp engine paint as well, but i reccomend using one with the ceramics in it. duplicolor makes them and their really inexpensive at autozone. i used the same paint on my interior as well, because the ceramic is really tough and i didnt want a regular paint to bubble or crack i...
- March 7th, 2005, 8:52 am
- Forum: Electrical & Lighting
- Topic: LED Single Color UnderCar Kit..
- Replies: 6
- Views: 549
okay... just to be honest to start i havent seen any products from the companies you list. that said, i have never personally seen a led underglow kit that put out decent light. bright... yes. but you get this horrible little dot show under your car even with some wide angle ones ive seen. what is y...
- March 5th, 2005, 11:25 pm
- Forum: Electrical & Lighting
- Topic: Mazdaspeed Miata Headlights
- Replies: 12
- Views: 1000
a personal preference of mine on painting parts is the ceramic engine paints. duplicolor makes an awesome line of them and i have worked with them a lot. just make sure you wash then scuff up the area first before primer (use ceramic primer too). i used it on some of my interior pieces as well. toug...
- March 5th, 2005, 11:21 pm
- Forum: 4-Cyl. Technical/Performance
- Topic: What do you think is a better car and why do you?
- Replies: 12
- Views: 498