MX-3.com

The following is what I've done so far, please tell me if it makes sense:

(From FSM test outlines- Quoted by BuGs)

-checked for continuity from ECU 2E to W (at distributor) = There is contiuity.

-checked for good voltage (0-5 Volts) at terminal 2E and 2G (At ECU) with ignition ON = Using a ...

I have a M/T MX-3. The info above does it apply to M/T because the wiring diagram doesn't have that points 3F and 3H for ECU.

I checked the voltage going into the ignitor it read approx. 12 volts and the wiring harness is has no apparent breaks cuts etc.

I called a Mazda Dealer in Toronto (Sheppard and Morningside) they said it costs $89 to retrieve the code from ECU and check the ECU.
Also, called Japan Auto Parts they ...

I want to check if it's is my ECU that is causing my car not to start.
How do I check it using a voltmeter(I don't want the dealer to do it $$$$, something I don't have right now)?

The 95 MX-3 Shop Manual for M/T has the voltage checks etc. for checking the ECU inputs and outputs but they don't ...

Is the ignitor the thing that connects to the ignition coil?
I've checked it and reads 12 volts supply.

Thanks BuGS for the info.
So far I have checked the coil and it has no spark. I'll be checking the ignitor next.

Thanks for the offer I am interested but I want to make sure that is the problem frist.

So how can I check that the distributor is the problem, independently.
For example, when I take it apart what are signs that it's no good or what electrical tests can I conduct that will tell me it's no good.

Does the sensor come with the distributor or is it something seperate?
Also, how much does a distributor cost?

I have a '92 MX-3 5-spd. 1.6L, that doesn't start.
So far I have retrieved code 2 (No NE Signal - distributor) using the jumper technique GND - Ten.

At first, my engine wasn't cranking and the code at the time was 23- RH heated oxygen sensor but after clearing the codes it never came up again ...

My appologies, my name is MZein not "foo".
I've posted it as a different topic.

My MX-3, too, doesn't start up in cold weather.
I did a diagnostic code check and the code is "23".
Does anyone know if the codes SOHC and DOHC engines OBD1 are the same?
If not then can someone tell me what this code means for a '92 MX-3 1.6L SOHC engine?

Thanks in advance.

Where do you get the code reader from?
I went to Canadian Tire here, in TORONTO, but they only had everything for 1996 and on for all import makes except for MAZDA!

Thanks in advance.

Where do they sell code readers for Mazda MX-3 '92 in Toronto, ONT. Canada?

Any help with this is greatly appreciated. Thanks in advance!

Looking for fuel filler neck for '92 MX-3 4-cylinder. If you have one that doesn't have any rusted out let me know. Also, post your price too.

Please post pictures of you MX-3.
If you have not sold it yet.