MX-3.com

Install was a failure, reverted back to stock wiring. Check my post in the v6 tech section for weak spark.

Anyone? Give me the link so I can click on the ads for you! Just a simple free way to support fellow mx3ers.

my channel is under hgallegos915

New development... when I connect the injectors I get no spark.. and yes spark when they are not connected. So I removed megasquirt and connect the ecu.. no spark.. then I changed ecu, changed coil, and got spark but no start. My goal for now is to start the car without megasquirt. I dont understand...

So I double checked all the cables. I had the disty ignition wire wired up to the ecu AND megasquirt at the same time. I hope I didnt fry anything. I clipped it as per instructions and connect to megasquirt in the right wire. Double verified all the wires and NO spark :(. I have voltage to the HEI a...

Hi,

I need a picture of whats inside the diag cover. Inerested in ten and gnd pin. My cover is not there for some reason. I need to calibrat my tps. Thanks in advance.


92 v6 2.5

Guys I need some final help as far as wiring goes. Its all done except two wires.


PINK which is for launch control. It reads "Wire to clutch pedal. Ground to activate"

Switchable tables reads "Ground to activate"


Almost there!

I get it!! So last question I PROMISE. I think..

TAP into ecu means get the wire cut into it and join a wire to megasquirt while staying on the ecu at same time?

Ok so disregard the last spam..

anyways ok I am close. Now the MS instructions call the ECU pin outs by NUMBER. Example PIN1 is black and goes to ground.

Yet on the ECU the pin outs are labeled 1U 1s 1q and so on. Not in a numerical order. any tips?

Sweeeeeeet! Thats just what I was looking for. I was confused as to why there are two sets of red and black but like you mentioned these are in a gray sleeve so those go to injectors. Awesome! Thanks!

I dont have an ac but it seems that for starters, piggyback seems the easier route.

So I will be installing it from shadowme's 6th bulk buy. I just have a few questions and maybe simple to you . What "Cut wire at ECU, splice to Injector." So I cut the wire that goes straight to ecu and leave nothing there? and then run that wire to the injector? or cut wire and leave it c...

HMMM I wonder if that wiring connector is ONLY compatible with their megasquirt or if it will work with the one I got from shadowme..

So I hadnt been there in a while. Please bepatient with my GoPro HD. Its not good for this kind of recording. Also my ffastest time has always been 13.9 and in the winter. My fastest run was 14.3 tonight. Took out a new charger and a turbo 350z. My boost is at six and i some races spiked to 8.. whic...

LOL this is hillarious. I actually feel honored because my car looked and still looks like a piece of bat guano... they just flipped the picture. You can even see my cracked dash lol http://cgi.ebay.com/ebaymotors/carbon-fiber-vader-HOOD-mx3-90-95-NEW-BOX-A-/290590375533?pt=Motors_Car_Truck_Parts_Ac...

I call on the powers of the mx3 community in helping me find the half shaft.


Anyone got one? let me know. I do not even need the whole thing, I just need the bearing side of the shaft. If you have it let me know please!

So I am part of revenue sharing yay! Check out my mx3 videos and PLEASE support the cause!! Click on the ads, if you click on the ad that pops out in the video I get 5 dllrs if you click at least on 3 ads no joke ! lol I hope you guys dont consider it spamming as its a MX3 video and look at all thos...