MX-3.com

Hi,

Sorry for the delayed response.

I have taken pics of everything, if you want to see them email me and I will send them to you. Spinkx79@yahoo.ca

A few answers to questions:

Poly bushings are for control arms, body and the bronzeoil busings are for the shitfer and something else. Search SRD ...

<<Updated>>

I no longer own any MX-3's but have a bunch of parts I gathered for a custom build years ago.

Been thinking of selling to someone who can and will use them instead of sitting in boxes for the next 5 years.

If there is interest I will take an inventory and pictures to post them here ...

Its been 5 years since ive been on here, I have a ton of parts at my work that I had been collecting for my project.

I pretty much had the all the engine, fuel and ignition systems.

Off the top of my head without going back there and looking i have:

A dis assembled 97 Probe 2.5l.
ZE Heads (used ...

Correct me if im wrong but i dont think that is 70mm, below you will see some pics of my 67mm and you will notice that mine has no steps like yours does a tthe opening, it is cut straight through. You would need to measure the inside of the top step.

http://i88.photobucket.com/albums/k170 ...

Do you have OBDII wiring diagrams for the 96?

If so can you send me a copy?

Does anyone know if the Post 96 diagrams exist? Ive been trying to find them for a loooong time.

what is the stock on the millenia tb isint is at 66 already or somthing like that????

Stock millenia is KL68 (possibly KL47 as well) and both are 60mm.

"IRC K8 TB's are 55mm and can be bored max to 60mm"

Thats so not correct....we bore K8 up to 68mm but it´s right that KL´s only could be bored ...

damn....wish i had an extra set of cams....i can't have the downtime needed for this

Neither can i... I would have the shop remove them but i dont want to much of down time. Ill probably end up buying kl31 and then having shop install because I dont want to mess with that :S


Ian and Hector ...

Good one :wink: .

Ive been tempted in the past to aim my passenger wiper nozzel to the right for asses like that so i can pull up while they are freaking out or flippin me the bird and help them cool down with a little shower of the blue stuff.

Never bothered though was too scared they would get ...

Theres a Bulk Buy just finishing on Probetalk for Colt Cams re-grinds, if you are in need you can still get in if you act now. Its the best price ever offered form Colt and most likely the last BB for "some time" as per Geoff (owner)

Info:
http://forums.probetalk.com/showthread.php?p=1923031255 ...

Theres a Bulk Buy just finishing on Probetalk for Colt Cams re-grinds, if you are in need you can still get in if you act now. Its the best price ever offered form Colt and most likely the last BB for "some time" as per Geoff (owner)

Info:
http://forums.probetalk.com/showthread.php?p=1923031255 ...

IIRC K8 TB's are 55mm and can be bored max to 60mm, KL TB's are 60mm and can be bored to 67mm max, although there was someone who bored one to 68mm. The restriction is the wall thickness, anymore and your gonna poke through.

I have a 67mm from an old BB on PT from PMO.

g/l

In reading on PT, "Clevite" bearings (could be spelled wrong) are the best.

These are the ones i think i will go with, dont have a part number or a source yet though.

g/l

Is that a functional hood scoop or just for show?

In your Camshaft section you can add Colt Cams as they offer a few different grinds for the 2.5l.