Search found 5 matches

by zipad
February 18th, 2004, 11:46 pm
Forum: 4-Cyl. Technical/Performance
Topic: Wouldn't start again...Now its fine?
Replies: 4
Views: 145

Re: Wouldn't start again...Now its fine?

I have the same problum. The way I fixed mine was first I took a rtv sealer and sealed my distributor cap. Then I used an injector cleaner.And then I started useing higher octane gas.I went from 87 to 89. Have had no problum sense. Hope it works for you.
by zipad
January 4th, 2004, 7:48 pm
Forum: 4-Cyl. Technical/Performance
Topic: will not start?
Replies: 2
Views: 56

will not start?

92 mx3 will turn over and want to start but doesn't. If I let it sit for about 40min it will. Only happens when it is cold or damp outside. I replaced distributor cap plus wires. I'm thinking fuel problum. What do you guy's think.`
by zipad
November 18th, 2003, 7:30 pm
Forum: 4-Cyl. Technical/Performance
Topic: Noise
Replies: 5
Views: 184

Re: Noise

Look for loose or broken caliper bolts. Look at the squealer on the brake pads. The squealer is the little thing that tells you your pads are bad.
by zipad
November 17th, 2003, 8:26 pm
Forum: 4-Cyl. Technical/Performance
Topic: Noise
Replies: 5
Views: 184

Re: Noise

Did you look at your brakes?
by zipad
November 16th, 2003, 11:15 am
Forum: 4-Cyl. Technical/Performance
Topic: no heat
Replies: 1
Views: 64

no heat

I have a 92 mx3 with no heat. I have replaced the thermostat,heater core,and the radiator. What else should I look at?

Go to advanced search