MX-3.com

Hi guys,anybody ever heard of a dyno box? A friend of my gave me one. You can plug it to the engine and you can dyno it while driving. The box has an record option. After your run you can hook it up to the pc or laptop on the serial port. A litle program connects to the box and it wil create it's ow...

I received my ecu from Lazzyie yesterday ! I'm so happy !!!! My milleage improved with 70% (believe it or not) Cold start is perfect. Sounds like a normol mx-3 instead an old harley fatboy. No more unburned fuel and lots of smoke. The idle is stabile etc (to much to mention)<p>one issue I found.<p>I...

Hi guys,<p>Anyone overhere with the curved neck klze and using a strut bar?
I had to remove mine because it was banging the engine.
Any suggestions?
thanks

is your car smoking a lot?
otherwise I think the valves seals needs to be replaced.

you guys are right about that !
A crow bar at least !!
I needed my fat mechanic to jump on it
You need a big screw drawer for this pal

Open the hood and look if you see any cracked hoses. Sounds like a vacuum problem. If it was the thermostat it will overheat. After running the engine for a while and stopping at the stop lights it will suck hot air. Than the idle will flucturate even worse. I'm almost sure that there is a hole crac...

No mods, just the kl-ze. Yours is running richer? What is your milleage and is that with the k8 ECU ? I've ordered a kl31 ecu from lazzie (think I'm spelling his name wrong) Hope it will be better than. UPS sucks alot again because they are much to late again ! Looking forward to see your track driv...

yes, it was the 1/4<p>My car was running like ****.
look to the car when leaving.
lots of smoke (to much fuel)
I ran it@ 14.8<p>Not that good.
But it was cool !

Hi guys !<p>I've been to the track and I've got filmed. My run was against a viper The viper had a faster kwalification time as me so he had to wait a sec longer for the green light.<p>MY car is a kl-ze http://members.brabant.chello.nl/~j.wijman/de_wedstrijd.wmv <p>[ April 10, 2003: Message edited b...

Yes, I saw track times of 14 or even lower but I want to know what they run with the k8 ecu and after the replacement with the kl31

14.4 is not bad at all !<p>I think the car drives now I'll never drive 14.4<p>I hope the Ecu will do something about that. how about the of gas with the k8 ecu? And how about running the engine when it's cold? Mine sounds like a harley when it's a cold start and a lot of smoke because it is gettin t...

Hi all<p>I'm running the kl-ze with my 1.8 ecu. I went to the track today and got high 14. Will there be any improvement by running the kl31 ecu? I should get low 14 and it's not because the way I drive it. My friend tried it to and he's a real good driver and he got the same time as me.<p> The idle...

I used the disty from the 1.8 because the kl-ze was broke. It is possible. look at the marks of the old disty. It think 2 cilinders are marked different. look to the old disty and just follow the wires from the cillinder to the disty. should be no problem. If it lost his timing, shift to the 4th and...

didn't you blow your head gasket?
Do you see white smoke comming out or oil in the coolant?

How much did the engine run?<p>stuppid thing to say maybe but can it be the disty?
If they change the ignition they will set the timing also I guess.
If your belt slips, the timing is messed up again.
Maybe you can check if it is your disty.