Search found 7 matches
- March 12th, 2011, 1:37 pm
- Forum: Suspension/Brakes/Wheels/Tires
- Topic: 95 mx3 front hub/spindle/knuckle assembly
- Replies: 2
- Views: 308
- March 12th, 2011, 12:35 pm
- Forum: Suspension/Brakes/Wheels/Tires
- Topic: 95 mx3 front hub/spindle/knuckle assembly
- Replies: 2
- Views: 308
95 mx3 front hub/spindle/knuckle assembly
will a 92-93 knuckle work on a 95 as long as you use the ball joints from that year or does more stuff need to be changed out, like the tie rods, lower control arms, etc
- February 20th, 2011, 9:45 pm
- Forum: 4-Cyl. Technical/Performance
- Topic: b6 timing cover
- Replies: 4
- Views: 376
b6 timing cover
My wife has a 95 mx3 with a 94 1.6l b6, the problem is her front timing covers are warped and either they are rubbing against the timing belt idler pulley, or the water pump pulley (it seems to want to switch back and forth between the 2). my question is: a)is there a place that sells new timing cov...
- January 3rd, 2011, 2:19 pm
- Forum: Suspension/Brakes/Wheels/Tires
- Topic: steering knuckle fitment
- Replies: 19
- Views: 940
Re: steering knuckle fitment
not sure if the knuckles are damaged, the hubs, or more specifically the spindle portion (both sides) that the bearings sit on are chewed to SH_T, found this out when I almost changed out the bearings the extra knuckles would serve several purposes, 1. limited down time 2. if I get junkyard hubs (pi...
- January 3rd, 2011, 1:34 pm
- Forum: 4-Cyl. Technical/Performance
- Topic: car idle goes up and down and bogging out at 5ooo rpm
- Replies: 3
- Views: 529
Re: car idle goes up and down and bogging out at 5ooo rpm
I got a similar problem (95 mx3), just swapped another 1.6dohc from a 94, fairly certain i got bad injectors that are leaking down under excessive load
- January 3rd, 2011, 1:24 pm
- Forum: Suspension/Brakes/Wheels/Tires
- Topic: steering knuckle fitment
- Replies: 19
- Views: 940
Re: steering knuckle fitment
thanks everyone, thats exactly what I was wanting to know, I need to replace the front hubs and might just do the spindles as well if I can find them at a pick n pull, the car needs alot of work from front suspension, some vent tightening, wiring (interior fan doesn't need the key to be turned on) r...
- January 2nd, 2011, 7:47 pm
- Forum: Suspension/Brakes/Wheels/Tires
- Topic: steering knuckle fitment
- Replies: 19
- Views: 940
steering knuckle fitment
I have been reading through the posts and can't really find much on the steering knuckle, I am wondering if all the knuckles (non abs) are interchangeable between the model years. I have been researching this for a while now ( I have the Mazda parts listing as well) and the only thing I can find dif...