MX-3.com

Hey I am looking for a distributor and full preferably stock exhaust system with catalytic converter as well as oxygen sensor to fit into my 1994 1.6 litre DOHC

The car is totally stock just bought it a month ago changed the disty cap rotor, did timing, new plugs, new air filter, new fuel filter, new oil and coolant seafoamed everything cleaned tb and intake it seems to be running fine but every time I press the acceleration no matter how gently I try to pr...

Hey I was driving a bit around today and I noticed that when to start my car in gear I do not have to press the acceleration I onlydespress the clutch gently and it starts tomoved and will never stall unless I brake. It does this in all gears. Is there any potential damage that can happen over time?...

Hey I am looking for a distributor that would fit into a 94 1.6L DOHC 4 cylinder in the toronto area.
Thanks.

yup I need to change the whole exhaust from front to back so anything that you do not need and I might be able to use would be greatly apprecited. When was the last time that cat was in your 93 and when was the last emissions done on it?

nice nice i asume no rust and do you have any gaskets i may need and how much would you want for it plus shipping?

would it fit in my 94 without any cutting and welding and is it from a 4 cylinder, also is it juts a straight pipe or a 3 way

hey I am looking for a stock muffler cat and o2 sensor for a 94 1.6L 4 cyl in the toronto area
anyone can help much appreciated

my mx3 smells alot like gas when it runs if i changed the fuel filter will this help abit of do i has an exhaust leak and need to change the exhaust

How would you go about changing the cabin filter because the air always blows debris inside the car.

the correct firing order for 94 95 1.6l dohc is 1243 clockwise it should start from the top right cornerif You take ofur cap therotor should be pointing to the number 1 position.

i was driving it around abit today and i noticed that at low speed i can hear the belt it kinda has a weird swerve sound to it coud it be because i tightened somethingtoo hard or turned the crank pulley too much or what could it be change timing belt?? I also smellalot of gas that would prob be an e...

i just came back from canadian tire and i bought a timing light they had three different models a digital one which was the most expensive an advanced one and an inductive timing light which was the cheapest so i bought it, it should work fine right or are the other ones the better way?

Mechanic did not end up coming too busy so i kept on checking wat you told me again and to my surpirise the firing order was incorrect, the order that us given in the manual is wrong if you look on the distributor cap you will see a small 1 which shows you which is plug 1 and you go clockwise from t...

I did not take the distributor out completely just moved the position and i will try to get new wires
thnks for the help