MX-3.com

There are no MX3 around my area unless I want to drive out of state, and I need lots of parts. I still would like to buy the part, how much and shipping to USA 30028

1992 gs 1.8

Like the title says, mine does not work, I think.

Thank you! I have been wanting to know how to do this.

What if you splice the red/black and red in the dimmer? Just cut them and put them together. It may be your dimmer itself. I'm assuming you've tried adjusting the dimmer. Edit, bad call, just jumper them in the plug. I'm thinking, just because the only the illumination lights are affected by the di...

All the fuses are good, I can power the gauges off the dimmer switch for I am getting power. The connections are good as far as I can tell. Its not only the gauges it is also the A/C. The other lights light up such as check engine, low fuel, abs, the light for the key.

Still cannot find the stupid problem!! I am just going to get the aftermarket gauges and put them in unless anyone else has a idea.

I am still looking if anyone has both, Cash in Hand!

I did the same thing to my MX6! I washed the engine, started up ran really rough and never started again. The problem with mine wasI got the disty wet and it fried. It turned over very fast like the timing belt was off. Used a spark tester and found out I was not getting any spark.

I tested where the bulbs sit and I am getting power but only when I use the door or another soild ground. If one side is postive and the other is gound where the bulbs sit, then I could have a grounding issue. How many grounds are there that only go to the instrument panel? I have read there are 3 b...

The bulbs are good I checked it by putting them in place of the low fuel bulb and they lit up. The alternator is brand new as of last week. To test if they are getting power do I need to test where the bulb sits on the guage cluster?

I want to see if you can help me out too! My gauge lights and hvac lights don't come on. I have tail lights and power going to and out of the dimmer switch. All fuses are good. I don't know what else it could be, any ideas?

Software Developer in Atlanta GA!

It was the right part so I kept it. It got rid of the problems but I still have Code 16.

The part comes in today, if it is the wrong part then I will pm you about the vaf.