Search found 156 matches
- December 6th, 2011, 5:10 pm
- Forum: 4-Cyl. Technical/Performance
- Topic: Hesitation / Bogging Problem
- Replies: 6
- Views: 1309
Hesitation / Bogging Problem
Hello everyone. 1995 4 cylinder manual trans. To make a long sotry sort, was driving fine and car died. Started up right away but with a few extra seconds of cranking. Parked it at work, came out at the end of the day and nothing, just cranking. Towed home and finally got it started from cranking it...
- October 16th, 2011, 7:23 pm
- Forum: MX-3 Worklogs
- Topic: Letters11 - 1995 MX3 1.6
- Replies: 34
- Views: 6009
Re: Letters11 - 1995 MX3 1.6
Small Update. The plastic metal on the front lip didnt hold up too well to the pavers in the lip of my driveway so the lip is off the car now, curing with Plumbers GOOP. I used this on my aluminum rowboat and it held very very well so hopefully this will hol just as good. Also, installed a short shi...
- October 11th, 2011, 11:52 am
- Forum: MX-3 Related Items For Sale/Trade
- Topic: [EBAY] AZ-3 rear light up badge
- Replies: 14
- Views: 657
[EBAY] AZ-3 rear light up badge
Didnt know if this was posted already but only has 10 hours left, figured id post it anyway. Dont know if this is a good price or not. http://cgi.ebay.com/ebaymotors/JDM-AZ-3-Autozam-91-98-EL-Light-Up-Rear-Emblem-Badge-/300606863855?pt=Motors_Car_Truck_Parts_Accessories&fits=Make%3AMazda%7CModel...
- September 21st, 2011, 9:41 pm
- Forum: General Mazda MX-3
- Topic: Exhaust Flange Gasket
- Replies: 5
- Views: 1224
Re: Exhaust Flange Gasket
The exhaust gasket on the muffler to the pipe behind the rear tire calls for a donut type gasket that gets mashed in, like this one here: http://www.drivewire.com/images/shop/prodimage/images/WORLDPAC/W01331630632BSL.JPG Is that what you mean? this could be it. From the rear my muffler and then a p...
- September 21st, 2011, 2:55 pm
- Forum: General Mazda MX-3
- Topic: Exhaust Flange Gasket
- Replies: 5
- Views: 1224
Re: Exhaust Flange Gasket
my apologies, both flanges have the indents in them. Like a donut gasket would be in there.
- September 21st, 2011, 11:03 am
- Forum: General Mazda MX-3
- Topic: Exhaust Flange Gasket
- Replies: 5
- Views: 1224
Re: Exhaust Flange Gasket
BTW, I have a 1995 1.6L
- September 21st, 2011, 10:22 am
- Forum: General Mazda MX-3
- Topic: Exhaust Flange Gasket
- Replies: 5
- Views: 1224
Exhaust Flange Gasket
After the cat, the flange is flat. The next pipes flange that connects with the cats pipe is flat on the outside edges by the holes for the bolts but on the inside its pushed in. Almost like a circular cut out in part of the flange. I went to Advance Auto Parts and they didnt have the part number fo...
- September 7th, 2011, 8:24 pm
- Forum: General Mazda MX-3
- Topic: What size exhaust piping?
- Replies: 6
- Views: 679
Re: What size exhaust piping?
Went under there earlier and it seemed to be 1.75 inches. Accounting for the rust buildup, id say it was 1.75 but just wanted to check with everyone else..thanksRyan wrote:I'd guess its 1 3/4 or 2"....
K8 is 2" stock.
Go measure the pipe, even a measuring tape can do it.
- September 7th, 2011, 5:54 pm
- Forum: General Mazda MX-3
- Topic: What size exhaust piping?
- Replies: 6
- Views: 679
- September 7th, 2011, 5:08 pm
- Forum: General Mazda MX-3
- Topic: What size exhaust piping?
- Replies: 6
- Views: 679
What size exhaust piping?
Hello everyone. Just wondering what size the exhaust pipes are on the 1.6. See alot of people go with 2.25 inches. Not doing a exhaust job, just wondering. Also, where do you find a cheap resonator, been looking at other posts and see nice ones and i remember seeing some at advanced auto but now the...
- September 6th, 2011, 11:45 pm
- Forum: Electrical & Lighting
- Topic: Help on installing indigo gauges
- Replies: 21
- Views: 3150
Re: Help on installing indigo gauges
when I tried installing mine, I liked the look but the speeds didnt match up. The numbers on the white gauges started later than the stock ones. For example, the stock gauge reads 10mph and the white one rear 15mph and so on. It wasnt a big deal but I decided not to put them in for that reason. Anyo...
- July 9th, 2011, 5:16 pm
- Forum: General Mazda MX-3
- Topic: CEL turns on and off whenever it feels like it
- Replies: 3
- Views: 559
Re: CEL turns on and off whenever it feels like it
hopefully this will be the last time im posting about this problem. the diaphram in the egr valve moved as if it was supposed to. I started the car up and lifted the diaphram and the car almost died and when i let it back down it was fine. Also, the small hose that connects to the front of the stock...
- July 8th, 2011, 8:45 am
- Forum: General Mazda MX-3
- Topic: CEL turns on and off whenever it feels like it
- Replies: 3
- Views: 559
CEL turns on and off whenever it feels like it
About 2 weeks ago, some water got in my alternator and it caused it to stall and not start. After drying out everything was fine, started right up, no charge needed or anything like that. A few days later, my check engine light came on while going up a hill, i pushed the clutch to shift and it went ...
- July 2nd, 2011, 10:12 pm
- Forum: Buyer/Seller Feedback Forum
- Topic: Whitefinish- Euro parts
- Replies: 20
- Views: 12254
Re: Whitefinish- Euro parts
Excellent seller. Answered all my questions, went out of the way to provide me with wiring schematics as well as a different part unlisted. AAA+++
- May 13th, 2011, 8:16 pm
- Forum: General Mazda MX-3
- Topic: Who was this? Route 79 in PA close to WV
- Replies: 3
- Views: 550
Re: Who was this? Route 79 in PA close to WV
Possibly, I cannot remember. Maybe black rims IIRC??Dark_Rider2k3 wrote:Body kit with rims?