MX-3.com

I need a distributor with a good cam sensor. I already have the HEI upgrade, I dont care if the coild and ignitor work or not. My car is throwing the cam sensor code, and I dont want to spend $200 on a distributor. Please let me know what you want for one, and I am in Ohio so give me a shipping quot...

I am doing the HEI mod, the dizzy shouldnt operate, with the exception of the cam position sensor. I am getting spark now for sure, I dont know what the deal is, the car is trying to start its so close its driving me insane. Thats why I figured Ill get a good ECU and a good set of injectors, my plug...

Well the car is trying to start, I dont know if I have a screwy ECU or what. Since I am not getting many ideas I am going to replace that, I know the VAF is good and I am getting new injectors while I am at it. Also, I have alot of oil on my plugs, I have compression that is within specs. And I test...

Well I had the ignitor and the coil tested, I have quintuple checked the wiring. Everything is correct as far as the ignition, can someone with a working HEI mod politely post how much continuity I should expect between the rotor and distributor cap. I feel like it has to be spark related now, I am ...

Well the car wont start with the firing order in that thread, mine is definately different. I got it started last night, but it ran like crap and it wouldnt idle... And I had it running for about two minutes, I tried pulling trouble codes and there are none. Now it wont start at all, I dont get it a...

Thats the thread I dug that pic out of, it doesnt make any sense though because my cap has the numbers molded into it, and the car ran with the wires like that... My distributor doesnt look like that either, and the cap I ordered from advanced fits the distributor I have but not the one I got from t...

I tested my old VAF and there was no continuity between E2 and THA, I tested the VAF I bought and it is well within spec. However I looked up the firing order and were the wires go on the cap. I found that someone had there K8 wired differently than mine, I am following what the cap says it has numb...

WOW! I cannot believe my luck!! I went to my favorite local junkyard (I know everyone that works there) And they had just gotten in two Mx-3's! One is an RS but the other is a complete GS. I go there on a regular basis for random parts for my 1981 Rx-7 so I am in the Mazda section quite regularly, w...

Did you disable the internal ignitor module in the disty? Yep, I disabled the factory coil and the ignitor. I did that after I mounted the new ignitor and coil, but before I tryed to start it. I really dont have the money to drop on a brand new VAF and 929's and Mx-3's are slim picking around here...

Hey everyone, I am new around here. I have been searching around the forum for the last few days and have solved alot of my problems. I have just recently purchased a 1994 GS that is really cherry, has been sitting due to running rough. I did the HEI mod, and I have an external coil as well. I have ...

New Carlisle, just north of Dayton...

I would be up for a meet, just post time dat and location....