Search found 66 matches

by exile84
May 14th, 2008, 12:30 am
Forum: V6 Technical/Performance
Topic: idle problem
Replies: 1
Views: 179

Re: idle problem

Ill let you know before anyone else gets to ya. Learn to use the search function, and welcome to the forum. But it sounds like you have a vacuum leak. Check the Air intake hose, make sure it doesn't have any cracks in it. Take it off very carefully, and check for holes. Or you could spray some wd-40...
by exile84
April 28th, 2008, 6:21 pm
Forum: MX-3 Related Want to Buy Forum
Topic: [WTB] Black door and fender
Replies: 0
Views: 137

[WTB] Black door and fender

I am looking for a black driver side door and driver side fender both need to be in pretty good shape. for a 1992 gs. Pm me. Thanks.
by exile84
April 8th, 2008, 1:49 am
Forum: V6 Technical/Performance
Topic: Camshaft position sensor??
Replies: 0
Views: 130

Camshaft position sensor??

Hey i am getting a code 03 from my car. I know its located inside the disty. I have the HEI mod and external coil. Is there anyway i can fix this? any input is greatly appreciated. Thanks.
by exile84
March 31st, 2008, 1:52 am
Forum: V6 Technical/Performance
Topic: 94 GS Starting problem - Distributor? HEI Advice?
Replies: 24
Views: 4822

Re: 94 GS Starting problem - Distributor? HEI Advice?

http://www.youtube.com/watch?v=wHcAE_hurNA" onclick="window.open(this.href);return false;

Here is the link to the video with my 3 pin not being connected.
by exile84
March 31st, 2008, 12:48 am
Forum: V6 Technical/Performance
Topic: 94 GS Starting problem - Distributor? HEI Advice?
Replies: 24
Views: 4822

Re: 94 GS Starting problem - Distributor? HEI Advice?

True... I will try to get a video or some pics posted showing how i have mine ran/wired up. If i can get a video up, i will start it and show that it runs.
by exile84
March 28th, 2008, 4:03 pm
Forum: V6 Technical/Performance
Topic: 94 GS Starting problem - Distributor? HEI Advice?
Replies: 24
Views: 4822

Re: 94 GS Starting problem - Distributor? HEI Advice?

When using the external coil, all you are doing is bypassing the disty. You are just using the disty to throw the spark to each plug wire. The 3 pin connector is connected to the ext. coil. Since this is being done, it does not need to be plugged into the disty. The coil and hei module are getting s...
by exile84
March 25th, 2008, 3:32 pm
Forum: V6 Technical/Performance
Topic: Runs like poop
Replies: 10
Views: 438

Re: Runs like poop

Still haven't figured out what my problem is. I have checked all my plugs, and they are all good, checked my firing order. Going to get the exhaust fixed on friday. Will repost if this helps or not.
by exile84
March 25th, 2008, 3:28 pm
Forum: V6 Technical/Performance
Topic: 94 GS Starting problem - Distributor? HEI Advice?
Replies: 24
Views: 4822

Re: 94 GS Starting problem - Distributor? HEI Advice?

I ran into a problem with the 3 pin connector while i was doing the mod. I used an external coil. Currently i dont have the connector plugged in. I found out that it would start without it, so i just cut it off. She starts, and drives very well. Not sure if this helps.
Tim
by exile84
March 21st, 2008, 2:11 am
Forum: V6 Technical/Performance
Topic: Runs like poop
Replies: 10
Views: 438

Runs like poop

I have a leak in my exhaust where it goes to the cat. My idle jumps from 750 down to like 500. Anyone know if this would cause that? I have checked all of my vaccum hoses/connections. Its fine while driving down the road, but if its in neutral it sounds like its putting.....
thanks in advance.
by exile84
March 7th, 2008, 3:25 am
Forum: V6 Technical/Performance
Topic: Exhaust Question
Replies: 1
Views: 108

Exhaust Question

Not sure where to put this question, does the 4cyl and 6cyl have the same cat? Cause i found one on ebay for a 4cyl, but it says that it doesn't fit the 6.
I have a k8 with a stock cat that is clogged. Thanks.
by exile84
March 5th, 2008, 4:53 pm
Forum: MX-3 Related Want to Buy Forum
Topic: [WTB] Hatch Garnish or Spoiler
Replies: 4
Views: 227

Re: [WTB] Hatch Garnish or Spoiler

I have a metallic purple one, if that helps.
by exile84
February 8th, 2008, 5:08 pm
Forum: Transmissions
Topic: Quick Tranny question
Replies: 1
Views: 224

Re: Quick Tranny question

Okay nevermind. Searched myself, (should have done this first) and found that it will interchange as the de and the k8 are the same on the outside.
by exile84
February 8th, 2008, 4:58 pm
Forum: Transmissions
Topic: Quick Tranny question
Replies: 1
Views: 224

Quick Tranny question

Hey I have a 1993 mx-3 gs with a K8. I was wondering if a 97 probe gt trans will fit. I have done the atx to mtx swap and was told that it will fit. Will it? will i have to change to the bell housing? or is it a direct bolt up??? A guy at the junkyard told me it will not. Please let me prove him wro...
by exile84
January 21st, 2008, 4:38 pm
Forum: V6 Technical/Performance
Topic: millenia S??????
Replies: 5
Views: 395

millenia S??????

I was looking around, and couldn't find anything about this. I searched and searched.
Will a millenia S motor fit in a 92 GS?? I can't find anything on this motor. Is It a DE with a supercharger? Or is it a different kind?? Any enlightenment would be great. Thanks..
by exile84
January 21st, 2008, 4:32 pm
Forum: V6 Technical/Performance
Topic: Quick Starter Question
Replies: 5
Views: 220

Re: Quick Starter Question

Alright, went out today after the car had been sitting for like almost a full day, turned the key and she started???? The night she died, it was like 19 degrees. I think that the battery has just gone kaput... Put a new battery on her, and she is running like a champ. Thanks for all the help guys. I...

Go to advanced search