MX-3.com

After installing everything and buttening it all up i noticed a few problems... Please note that three electrical connections from the transaxle are hooked up as before. 1st problem: Automatic seat belt went foreward when i opened the door but did not return when i closed it, tried the passenger sid...

Hey be careful with that napa flywheel i told you about.... They gave me the SDF 917 flywheel i took it home pressed in the bearing and went to put it on and realized it only had six bolt holes LOL I turned in the core when I ordered it and hed my fiance pick it up. They sent the core to Sacremento ...

forgot to mention that i noticed the rust coated flywheel in the background of one of the pics, you definately want that thing clean like a morror before you put it together and resurfacing is 25-30 dollars as opposed to a brand new napa one for only 15 dollars more. if you get the kit and flywheel ...

I would as long as you have it apart. It doesn't look too bad but i dont like the rubber bushings.... the napa replacement has springs instead and if you get the kit for $125.00 (just bought one this week) you get a new throwout bearing, disc, pressure plate, pilot bearing (the one in the center of ...

I wen ahead and replaced the flywheel with a brand new one only 42 dollars at napa....

is anyone having trouble viewing the pics? I think all you have to do when you click the link is click the view now button let me know if it isn't working.... I was considering building the aluminum back up with JB weld and sanding it till the throowout bearing slides smoothly back and forth again a...

Any ideas on where to get a used case for cheap?

it looks like thats where it was coming from ... I broke the old one when I accidentally leaned on it loosening a tranny bolt so I cant check if the valve was bad but i got a new one hopefully thats where the smoke was coming from and not the rings..... I was burning a quart of oil every three weeks...

Thats how a big problem started for me. at first it felt like yours, within a couple of weeks the throwout bearing started making some noise and then, BAM, everything flew apart. http://www1.snapfish.com/thumbnailshare/AlbumID=220881840/a=18925656_18925656/fromupload=true/imagecount=17/videocount=0/...

oh sorry just noticed it durring a clutch job

Here's a link to the pics of the clutch job. the shaft that the throwout bearing rides on is all chewed up by the old one flying apart. one of the flywheel pins came out to do I need to worry about that? http://www1.snapfish.com/thumbnailshare/AlbumID=220881840/a=18925656_18925656/fromupload=true/im...

Found some oil in the intake when I removed the air box.... does this mean it's not bad rings that are causing smoke at high rpm? the oil has blackened everything past th throttle valve...

the mx-6 clutch is 3/8" bigger in diameter will this affect anything? Will the pressure plate from the mx-6 clutch kit bolt onto my Mx-3 flywheel without any problems?

My MX-3 is a '92 1.8
the earliest MX-6 kit available is '93

Thank you ....

Ok im going to napa today to order it when I talk to the guy i want to tell him its for a 92 ford probe v6 rather than an mx3?

Hmm. ok

well i decided to wait on changing the engine.... no replies?

Which Clutch should I get and where?..

Exedy? centerforce? OEM?