MX-3.com

1994 Mazda 626 ES parts car, 5 spd, ABS, all ES options. Hit in front but front suspension OK. It is not driveable. Airbags blown. Hood OK.<p>This would be a great car if you wanted to do the I4 to V6 swap and ATX to MTX swap at the same time! Four wheel disc brakes!<p>Has about 140K miles, engine w...

Certainly!

Same trans is used in both Probes/626/MX-6 and MX-3.

FYI Xero, that is a WATER temp gauge, not an oil temp gauge. Yes, it appears the thermostat could be your problem. A malfunctioning thermostat would also cause your BAC to adjust idle air.

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by snadman: So the wiring harnesses shouldn't be any different? <hr></blockquote><p>If you get any piece of a wiring harness with the engine you buy, remove it. You'll be using the wiring harness ...

www.jepistons.com will also make you a custom set.
FYI, they're not "ZE" pistons if they're custom, just plain KL.

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by IanL: <p>True for '93 & 94, but Millenia was increased to 170 for '95 to '97. All increased to 170 in '98. <hr></blockquote><p>170 is the HP number, not the CR. Come back with a CR number a...

If you get a Jspec MS-8 manifold, then it has a block off plate on the backside of the manifold where the US Millenia has an EGR valve bolted to.

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by curtklze: The engines are all the same, they all have around 160-165 HP, what accounts for the H.P. difference is the ECU programming, the millenia has a higher comperssion ratio, better flowin...

Look on the radiator side of the trans, see the big bolt that's the same size as the drain plug? That's the fill plug. Remove it, rig some kind of hose and funnel, and fill it till it just overflows through that plug. <p>On www.mx-3.com (y'know, the site that sponsors this BB?) there is an online sh...

What is a button?

Online shop manual, page F2-109.

If anyone wants to bore out their K8 TB, I'll gladly sell them a 60mm throttle plate!<p>$5 for the plate plus, a la eBay swine, shipping and packaging charges which bring the total to $20!!

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by powerman_5000: Thanks for the help. I've been meaning to buy that book of the longest time, but i'm just too lazy to go up to Barnes and Noble to buy it. <hr></blockquote><p>Amazon.com delivere...

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by endocyc: OK I dont think you understand, Im driving a standard and the idle shouldnt be affected by gear selection aslong as the clutch is pressed. With my clutch in the idle will rise apon gea...