MX-3.com

I'll soak it with some "crown" its like commercial WD40 but twice as strong. If it won't come out I'll let it soak over night like you said and if it still won't come out I'll have to have my step dad use the blow torches on it (he's own a body shop). He once told me they were sometimes suckers to ...

Its the original O2 sensor, the car has
168 000KM or 105 000 miles.

I think I will be changing it, its not hard to reach at all and I know were it is, but I hope its will come out of the exhaust manifold without breaking or without any problems.

Thanks for the help guys!

I just took the car for a drive, I put some gas and put a bit of oil in it, it was almost on the LOW indicator.

The check engine light didn't come on, but I checked the error code after the drive and it came up with the following codes.

Code 15 - Heated Oxygen Sensor (Inactivation)
Code 17 ...

I should of though of a search before posting
Thanks for the help, I found what I need

Were are the experts?

Hi guys, I have an 1993 Mazda Precidia, 1.6L 4Cyl, SOHC.

The orange check engine light started coming on not to long ago on the car. It will only turn on once the car is at its full operating tempeture and once I start doing highway driving, 50Mph and up or 80Km and up.

I'm wondering if any ...

Thanks for the help guys, just did an oil change, put in a new air filter and did a coolant flush.

I emptied the Radiator, then put in some coolant flush stuff and filled it up with water. I went for a 15 min drive. When I came back, I let the engine cool down, emptied the radiator again. Turned ...

I have an 1993 SOHC,

So? once I remove the drain plug from the Radiator, should I leave the engine running and let it drain.. or should the engine be left off wile its draining?

I would think that coolant would still be left in the engine if you just remove the drain plug on the radiator ...

Hi guys,

I know were the drain plug is, "at the bottom of the radiator" but do our cars also have a drain plug on the block of the engine?

I'm doing a coolant change/flush on my car this weekend.
I'll be searhing for it underneat the car, but if I know were to look it will save me lots of ...

Yes, its the same <P>

Me again http://www.mx-3.com/ubb/redface.gif )<P>I called a dealership, "keep in mind that im in Canada" and the guy told me that the part would probably be the air controle sensor wich is about 180$, but then he says that there is also the hole BAC valve wich is about 600$<P>Now, im a bit confused ...

I have one more question?<P>what would be the part # for replacing the BAC valve.<P>Thanks!

Im just wondering were someone like myself would get a termal wrape like that ?? <P>Thanks!<BR>

Unfortunatly I dont have some light to shed.<P>But I also have a 1.6L SOHC mx-3, and I was asking myself the same question ????<BR> <P>

Thanks for the info, <BR>my car as the same problem, but mine also stalls out at times.<P>It gets realy frustrating at times, especialy when im stuck in trafic.<P>I just wanted to know if you changed the part yourself? and how much the part was?<BR>And if not, were did you have it changed and how ...