MX-3.com

I was trying to fond info on this as well.

I need new calipers for my mx3 gs and was hoping to try p5 calipers.


Anyone ever try this?

Umm both the K8 and KL use a 225mm clutch disc...

I found 240mm clutch kits for the mx6 that should work.

Can anyone verify that a 240mm clutch disc will clear the stock flywheel?

anyone?

im working on it, not easy to get a camera behind the intake manifold on a klze.

it does say mitsu, has 1 vacuum line on it, ka87 i believe

Hi again everyone, I decided to take the day off work, the weather's good and it's calling for a nice weekend so that will give me three days. If that's not enough I should sell my wrenches. lol. Question tho, can I leave the passengers side axel in place and just slide it out of the ta as I take i...

LOL its for my klze swap... ANd the wife has to drive it from time to time ans she is hard on the clutch!

http://cgi.ebay.ca/XTR-STAGE-3-RACING-C ... dZViewItem

Thats what im putting in my mx3, But i got the KLZE and i want something that can take abuse.

ok so now im stuck on the head bolts...is it regular sockets? 13 fit but i think i made it skip 2wice with a breaker bar..any tips ? Um at this point i think you need to pick up a shop manual and do a little reading.... Not trying to be and a-- but if you gonna take the motor apart you may want it....

Well here is the story from last night.... Start the car. let it idle 10 minutes, rad hose blows...Ok fixed that. Start it again, idle 10 minutes, it is in diag mode now. Attempt to time the motor. Rad cap SPLITS in half blowing coolent across the garage. Ok put on the k8 cap. start car, cant time i...

Pull the codes for the CEL. Try the KL02 VAF with your setup and see if it runs better than the JE50. Kl02 on the stock ecu? it was my understanding that would not work. Either way im not sur ehow to pull the codes on an OBDII mx3 yet but ill look into it. I drove it tonight for the first time and ...

I cant get amsoil at walmart here so i cant run it

Mobile 1 5w30 or 10w30 depending on the car for all my cars!

I use cheap filters but never a fram filter (junk).

Change my oil about every 5000km (first few after switching to synthetic at 3000km just to get the dirt out)

Well i mamaged to get a new klze curve neck from tigerjapanese. Got it installed and running! Using all OBDII wiring, ecu, vaf. Using all origional sensors that came on the new klze (assume dto be OBDI). I managed to hook up the egr as well! I have a cel but not sure what its from yet, the car had a...

tigerjapanese was ok, 1046 was shipped tax in, customs and all, decent motor too.

DO NOT PUT YOUR MX6 CALIPERS ON YOUR MX3.mx6 had one the shittiest brake calipers at the back, they sieze in a day with no driving. everyone who's doing rear brakes puts Protege/Protege5 calipers on the back, they are much better That may be so but im not raping my p5 to fix my mx3 :) maybe once my...