MX-3.com

2- shipped out today!! 2 LEFT!!!! here are better pictures showing where the bars mount. the LCA's are a multi-layer stamped steel piece. the bottom hole & middle hole(from the bottom going up) must be slightly enlarged to match that of the upper hole ( M12 bolt size ) easily done with a drill/g...

Both sides are in axis to the LCA's swing. Cone spacers are provided instead of tube stock @ the heim joints- this allows for more pivot angle for the heim joints. Given both ends are inline & both utilize cone spacers you could theoretically max out one side for pivot & still have some angl...

The arc of the LCA angle under full compression & full drop (with suspension connected) is less then the total misalignment allowable @ the hiem joint.

I think you need a better understanding of how the hiem joint is working. I'll post some more pictures of the connection @ the control arm.

full lock-lock turning is maintained tested with 215-55-16's there is no push/pull effect in the arc angle from the LCA to the forward mounting point. hiem joints are utilized to eliminate binding forces of such arc movement. In any given situation with bushing flex there is allowed SOME LCA shifti...

yep. thats one of them.

edited the first post with photobucket reference links.......
Let me know if they work now

no. there are only 4 im not doing a mass group buy.

PS can you see the pictures or no?

Due to an overwhelming amount of inquiry's
heres a thread!!!!

viewtopic.php?f=2&t=79077&p=598953

Here's a real design for the community. These actually work!!! As opposed to that horizontal design along the LCA which physically cannot actually aid in increasing traction in a forward line. im simply baffled by how the previous seller could have gotten away with selling a part like that & cal...

PM's replied accordingly. I have a very limited quantity of my design (6 in total 4 left)

-Ryan

Thread Bump from the dead
I Hope these aren't being sold anymore...........

I have a significantly better alternative for anyone who's interested
shoot me a PM

A heads up to everyone in the mazda community
A winter raffle........ MS2 extra!!!!! see the thread & spread it around on all forums

http://www.clubprotege.com/forum/showth ... p?p=665722


-Ryan

Up for grabs!!!!

http://www.clubprotege.com/forum/showth ... p?p=665065

The offset rear bushings induce positive castor. --this dramatically improves the front end stability of the car & ride comfort. The only Downside to this is some increased steering input @ slow speeds- I.E. parking lots/turning out of your driveway. With the elimination of LCA spring load from ...

Good info is good.

measurements from pre & post 06/94 would be amazing

They are PTFE lined so do not "require" lubrication. However extra grease never hurt anyone. Bearings will be packed with quality high temp disc brake grease. unless otherwise specified. the bearings are replaceable in the event of wear. price wise- they aren't cheap. actually quite releva...