Page 1 of 1
back seat removal/install
Posted: January 13th, 2002, 6:37 pm
by back alley
ok, i need info. can anyone tell me how to remove the butt part of the back seat? also to install my 'new' back seat do i need any special clips or anything like that? i bought a back seat with better upholstery that mine and now i need to remove & install. thanks!!
Re: back seat removal/install
Posted: January 13th, 2002, 9:49 pm
by Maddbuck
there are two levers that hold down the back seat just feel under the front of it. Push the two levers and lift it up and out.
Re: back seat removal/install
Posted: January 13th, 2002, 11:25 pm
by Brainless
So there's no bolts or anything??
Re: back seat removal/install
Posted: January 13th, 2002, 11:30 pm
by -=deathtrap-mx3=-
not for the bottom portion of it. i think the back is held by bolts. the online manual shows the locations.
Re: back seat removal/install
Posted: January 14th, 2002, 12:41 am
by mrspanky79
if it is the same as the 94, the bottom seat is held on by plastic plugs/clips just feel around for them and pull up. The back is held on by four bolts very easy to take out. Hope this helps.
Re: back seat removal/install
Posted: January 14th, 2002, 2:11 am
by back alley
i'm assuming that i can take out the bottom without taking out the back part. is this correct?
Re: back seat removal/install
Posted: January 14th, 2002, 2:07 pm
by mrspanky79
yes and you dont even need tools. Just feel around for the pionts were it is held down and pull up, less then a min to do.