Page 1 of 1
Intake Adapter
Posted: November 30th, 2001, 7:44 pm
by -=deathtrap-mx3=-
Where can i buy an adapter for a custom intake, i'm just replacing the airbox with a cone filter. i know corksport sells them, but can i get one for less than $20?
Re: Intake Adapter
Posted: November 30th, 2001, 11:47 pm
by white fish
home depot plumbing section 3inch silicone adapter
Re: Intake Adapter
Posted: December 1st, 2001, 2:32 am
by -=deathtrap-mx3=-
sweeeeet! thanks alot!
Re: Intake Adapter
Posted: December 1st, 2001, 10:34 pm
by David Coleman
That wont work for a RS, because IIRC it has a flat plate on the MAF that bolts to the box. You can make your own, though I'd just get one from Corksport. And don't put the filter right on the MAF, cause you'll just ingest hot engine air and lose hp [though gain noise, which is confused with HP]. [img]shrug.gif"%20border="0[/img]
Re: Intake Adapter
Posted: December 3rd, 2001, 12:48 am
by -=deathtrap-mx3=-
on the subject of hp:<BR> i figured leaving JUST the plastic piece that holds the hood prop would keep enough air coming in under the hood.<P>can i get a bit of piping and have a muffler shop bend as needed, so that it consumes more "cold" air