Page 1 of 1
Order custom brakes or blancs
Posted: June 21st, 2014, 6:03 pm
by WhiteFinish
Hi there,
Looking to find a new set of brake disks in a certain size.
Due to using MazdaSpeed 6 brakes, I want to stick at a 4x100 pattern.
It's very very difficult to find a good set in 4x100 that is coming close to the measurements of the mazdaspeed 6 brake disks size.
Who knows where I can find a company where you can order blank brake disks ?? So no hole pattern?
Or even have a custom size of brake disks according to own specifications.
Re: Order custom brakes or blancs
Posted: June 22nd, 2014, 8:47 am
by Jforce
I think you have too look for some custom made 2 piece rotors.
Like from stoptech or fastbrakes or something.
There is a german company who makes 300mm for 4x100 for an E30:
http://www.300mm.de/299mm/300294.htm
Also found this dutch company who apperently do custom disc's:
http://www.remschijf.nl/
Re: Order custom brakes or blancs
Posted: June 23rd, 2014, 9:08 am
by RogueWolf
I've heard mixed things about Ceika custom brakes... they look very good, but have a no-return policy if they don't fit properly.
Re: Order custom brakes or blancs
Posted: June 23rd, 2014, 9:37 pm
by kulluminati777
RogueWolf wrote:I've heard mixed things about Ceika custom brakes... they look very good, but have a no-return policy if they don't fit properly.
http://ceikaperformance.com/Shipping-and-Returns-1.html
Odd, I didnt know they didnt have a no return policy or I wouldnt have bought them they must be lying on there site. They did however send me another set of brackets at no cost, shaved my calipers a few mm's and re anodized them at no cost so mine would fit the smaller 15" wheels (most people run 16+ these days)..... Knowing how much they want you to be able to use the product now, return or no return policy I would get another set. Since its just rotors. If you send the right specs to them of exactly what you want you should have no issues.
Re: Order custom brakes or blancs
Posted: June 24th, 2014, 3:37 pm
by Jforce
The TS want's to use de mazdaspeed calipers and is looking for custom rotors.