MX-3.com

Posted: **June 16th, 2013, 1:22 pm**

Hi Guys,

What needs to be loosend to drop the front subframe ?
I don't want to have 90% of the bolts lose and than find out it got stuck on 1.

Posted: **June 16th, 2013, 2:50 pm**

Out of curiosity, what are you dropping the subframe for?

Posted: **June 16th, 2013, 4:13 pm**

For a blasted and coated one

Posted: **June 18th, 2013, 3:46 pm**

Hell yeah!!! I've wanted to do that forever!!!

I can't help much here, but take your time lowering it, and always lower in stages so you can check for missed hoses/lines.

Posted: **June 19th, 2013, 2:28 pm**

While your at it, add some spacers and lift it

haha

Posted: **June 19th, 2013, 3:20 pm**

It's not an Xterra

Posted: **June 21st, 2013, 12:46 pm**

Did you disconnect the steering shaft from the rack and pinion?

Posted: **June 21st, 2013, 3:27 pm**

Not yet...

Posted: **July 31st, 2013, 6:41 pm**

WhiteFinish wrote:It's not an Xterra

No no, that's what you do on a unibody R50 Pathfinder

And Subaru's

Front subframe