MX-3.com

looking for a good set of exhaust manifold heat shields from 1.8L V6

Do you need the full set?

I need the rear one, but if your front one is in better shape then mine I will take both.

I have the full set, it'll be coming off later today hopefully... I'm installing headers, so I won't be needing the stock stuff anymore.

I'll take pictures tonight or tomorrow for you!

The bolts that hold those shields on (8 or 10 mm ?) strip easily. I had to tear my shields off to get to the manifold bolts. Do you already have headers? Mine are coming off. Is your y-pipe in good condition? Thanks, Chris

That they do, I spray the hell out of them with penetrant and tape them out with a wrench usually.

Are they short or long tube headers? I already have a set, but a friend of mine is on the hunt for some as well. He may be interested, depending on condition and price!

Short tube headers. They are in good condition with about 4000 miles on them. Finish is a little discolored from heat and egr is capped off with threaded plug. Do you have a stock y-pipe you will be removing when you install your headers cause maybe we could just make a trade or something and you can sell them to your buddy.

Awesome, that'd be perfect for him!

I have a couple of them, one of them is in far better condition than the other though. I have 2 of my cars torn partially down in the driveway right now, I'll start removing it this week...

I will also take the exhaust manifolds in the trade. So your stock exhaust manifolds, heat shields and the better of the two y-pipes for my headers and y-pipe. Let me know when your close to having everything off so I can start taking mine off. Shouldn't take me more than an hour or so to get them off.

I have the full set currently pulled from my '92.

The y-pipe is a little dented, due to the car being so low to the ground, but it's all intact and not rusted through.

Send me some pics please

If the 92 doesn't have the better of the two y pipes i'm not interested especially if its dented. Looking for one with no damage, dents and heat shields still intact etc. I have a y pipe that's just missing a heat shield but still very usable. I would still like the manifold heat shields if you can get me some pics of those. Thanks

I'll get pictures of the whole setup

bump... still looking for these

Just need the front exhaust manifold heat shield. Anyone...