MX-3.com

Im interested to know just how low I have gone with my coilovers..
.. Is there anyone out there with fully standard ride height who would
measure from the ground upto the inside lip of the arch/fender in the centre of the wheel
back and front for me?

Thanks in advance

Might add that this is RS height, judging from your Signature

Ah yes thats right, thanks. Not realised there was a difference!

I'm not sure the exact difference(measurement-wise), but the springs are different to make up for the difference in weight. It shouldn't be too terribly far off, either way.

On my rs, stock suspension with 15" honey combs, and 195/60 15's it is 25 1/2 inches in the front, and 25 3/8 in the rear, from the center of the hub to the lip is 14 1/4 front and 14 1/2 in the rear, wheel and tire size should not affect that.

Hope this helps

Thanks thats great. So by my measurements that makes mine - 3 1/2" (90mm)