MX-3.com

looking for the crossmember the runs front to back hold the tranny also im looking for the front spindals from a 94 up with big ball joint
thanks im in ontario canada ottawa area

I have these items if you can't find locally.

damn your all the way at the peg, i just spent the whole day looking at the yards around mtl
everyones got the non abs spindles i did think there was that many gs without abs out there lol
im going to give it a week up on the boards to see if anyones got some closer if not im game to c what it will cost form the peg to ont thanks man

update i have a ugly looking x member from a wrecker, the glass beader going to love this pice of sh*t.
so it just the spindles needed thanks

try calling the scrap yard in alexandria… i know they had like 4 mx3's but not sure if they still have em!

good luck

ya i was at campeau in alexandria he crushed them a week ago

claude matte wrote:ya i was at campeau in alexandria he crushed them a week ago

ah ok that sucks!

I have the cross mmember in Thunder Bay but it is not pretty either. It has a jack mark on it. let me know if you are interested .

I have two front struts with springs and spindles complete. If you can make it to the meet in Kingston I could bring them. $30 bucks for both, both struts are good no leaks, springs are good and spindles have good bearings no noise. Brakes are off as are the disks. The strut shaft rubbers are ripped as to be expected. I'm not into taking them apart and shipping as I have no time right now, sorry.

hey daninski
i may take you up on that offer ill let u know tommorow i was going to see if a local machine shop can re size the balljoint hole on my 93 spindles to take the bigger ball joint in the 94+ cars the all the part stores carry
ill let you know since i have droped them off on wed hes going to call me if he can do it.
i may even take you up anyways so i have a spair set thanks man

It's pretty easy to knock the tone rings off and put them back on with a hammer. I just used a big blount chisel and a ball peen hammer. when I found out that new tones rings are like $66ea or something stupid. So if you could get the spindles cheap locally and someone could just send you the tone rings...that's the only difference between the ABS and nonABS parts I believe.

I'll measure the outer diameter of both spindles and get back to you. If the material is of the same thinckness just drill the holes out yourself (actually they should be reamed) then taper the top edge. The bolt retention ring on the ball joint would need to have the same depth as the thiner ball jont aas well or the bolt hole won't line up. Now I'm thinking we might be screwed because of the retainer bolt.

all went well i got a parts guy that had been looking in to it
he found 3 parts numbers 2 from moog and a jober deal none of them had dia sizes but he called me and told me about the 3 part numbers, so we had no clue as to witch i needed
so i ordered them all in so ya like 250 in ball joints on the bench in the shop lol.

so long story short theres a moog set that have the small size and ill be returning the othere 2 tomorrowill post part # so if anyone serches they will have the part #

thank you all that tryed to help sorry i have to decline the spindles Daninski
taped out

What you no buy my spindel I KILL YOU! Then I kill your dog, your family, people who you don't even know. I kill them all. 'Achmed' Check out this link, I have employed your cat to help me. http://www.heyquiz.com/quiz/cat_kill" onclick="window.open(this.href);return false;

Funny, the small spinels were only used in 92 so if you ordered 93 and up you should of been find. Canadian Tire has a listing for both and a sale on back bacon this week too eh.

ahhw thats funny man lmao

well i couldnt make it to the good old canadain tire cause the skidoo not running right and my dogsled team is sick and i did want to leave the wife alone in the igloo cause the igloo heaters not working right theres days. but u say they got a sale on back bacon i my have to just leave her here and get that bacon, did you see what the 10 gallon drum of maple syrups going for now a days, i could only get 2 last week
thanks man later

I love the tradition that when another man comes to visit you in your igloo it's impolite not to let him bed with your wife. I'm glad I'm not married.