Page 1 of 1
mx6 shifter linkage on a mx3
Posted: November 16th, 2009, 7:23 pm
by kurt5153
Hey guys I was driving around town n my shifter fell out of the floor. So I went to the parts store n they said the bushing would be 40$, then I went to pick n pull n got the hole shifter n linkage for 20$, will it fit?thxs
Re: mx6 shifter linkage on a mx3
Posted: November 16th, 2009, 10:58 pm
by wytbishop
I highly doubt it. I know from experience that a first 88-92' 626 has the same stabilizer and that a 91-94' protege one will fit very close. The stabilizer bar is the same on both GS and RS so you can use either. But the actual shift linkage is different so just be aware of that.
Re: mx6 shifter linkage on a mx3
Posted: November 28th, 2009, 7:38 pm
by 93SOHC
not the same... looks similar but won't work. I tried from my parts car mx6, no dice