Page 1 of 1

quick question

Posted: March 1st, 2009, 1:55 pm
by mccabe
ok so i was offered to get my exsahst done for free i just hav e to supply the muffler cat and piping my question is thet if it is done and i wont to swap a kl into my 92 gs willit still fit or will it have to redone???

Re: quick question

Posted: March 1st, 2009, 2:01 pm
by solo_ryder
Yes it will work. Get some 2.25" piping and a hiflow cat+resonator+muffler and you can use that setup on a KLZE/KLDE.

Re: quick question

Posted: March 1st, 2009, 8:57 pm
by projectzemx3
if you plan on using stock exhaust mani's and y pipe then if you swap for a KL and get some headers there will be a need for modification. the 7 pipe on the aftermarket headers go about 8" farther to the rear then stock.

Re: quick question

Posted: March 1st, 2009, 11:00 pm
by mccabe
yra im not buying headers but but from there downs all new. Im going to buy the headers off ebay tho when i do the swap?

Re: quick question

Posted: March 1st, 2009, 11:48 pm
by tehbrookzorz
Where do I get my exhaust done for free!?

*Insures car and drives to Calgary.*

Re: quick question

Posted: March 2nd, 2009, 7:14 pm
by mccabe
my buddys doin it at the schools shop i go to

Re: quick question

Posted: March 2nd, 2009, 7:23 pm
by Daninski
Ebay headers, $160 bucks delivered and they work great. I used a couple 1/4" exhaust spacers on the crossover pipe as the pipe contacts the oil pan. See motorsportpartz on ebay.