Suspension Boots + Tie rod ends
Posted: October 22nd, 2008, 3:25 am
Hi, I'm doing a ZE swap but need a couple parts before I can complete the swap. I am changing my suspension to Koni specials. Now I'm wondering if I should get some new boots, my old ones are screwed. Here in Australia it seems to be hard + expensive to get Eunos 30x (MX-3) parts. So I was looking at Rock Auto in America and even ordering from there, my dollar equating to .70 US cents, + delivery, things are still half the price of here!
So here's where I need you help - look at my suspension boot below - I'm not sure if this is once piece or two. I looked on Rock Auto but the pictures seem different - MONROE Part # 63973 More Info {STRUT-MATE BOOT KIT}
FRONT; Coupe. Will the rock auto one be ok? Am I looking at the wrong thing @ Rock Auto? There seems to be something called a strut bellow, which is two parts but looks more like what I posted.
![Image](http://www.momentuminternet.com.au/~kakarot/klze/boot.jpg)
Last question, are tie rod ends all the same for the MX-3? I am going to order a Tie rod end for the 1993 MX-3 GS.
Thanks!
So here's where I need you help - look at my suspension boot below - I'm not sure if this is once piece or two. I looked on Rock Auto but the pictures seem different - MONROE Part # 63973 More Info {STRUT-MATE BOOT KIT}
FRONT; Coupe. Will the rock auto one be ok? Am I looking at the wrong thing @ Rock Auto? There seems to be something called a strut bellow, which is two parts but looks more like what I posted.
![Image](http://www.momentuminternet.com.au/~kakarot/klze/boot.jpg)
Last question, are tie rod ends all the same for the MX-3? I am going to order a Tie rod end for the 1993 MX-3 GS.
Thanks!