MX-3.com

lately ive tryed to install a inter cooler on my 94 mx3 but noticed
the powersteeing line in the way
has anyone else ha this problem if so what did u do to fit it in
any any help anyone

Move the lines or get rid of power steering.

if i get rid of powerstreering
wouldnt that make the wheel harder to turn

Yes.

well that's not an opition this is a daily driver car

I drive mine everyday without power steering...

manual 323 rack.
I'll let you search on that.

u don't got muscle to turn that Mx-3 im sure there are plenty of mx-3's out there with out PS.

Yup take out the Power steering.....or somehow re route the line. I took mine out four years ago and havent looked back.

IIRC that line in front is just a power steering cooling line. I **THINK** its low pressure so you can just cut the line and replace with a smaller rubber section, and some hose clamps.

It's a line...can't you just re-route and extend it?

(I will never get rid of my power steering )

mazda 323 rack, thats the upgrade I need to do next year when i recondition my car.

Find out if it is the high pressure or low pressure hose of the power steering. If it's high pressure, ditch the PS. Are you a man or a mouse? It will only be hard to turn when the car isn't moving. If it's low pressure, you can cut it and re-route. DO NOT CUT THE HIGH PRESSURE SIDE. I think theres like an excess of 1200 or more psi.

Hope this helps,

Chris

both my cars had no power steering its only "hard" when your starting off, but if you build up a nice set of man muscles (by the way Muscle beach is THATA WAY!) you have no problem turning the wheels.

thread hi jack but how do you take out the power steering? is it just a case of removing the pump, resovoir??
or is it more involved??