Page 1 of 1

What you think of this exhaust!!!

Posted: November 3rd, 2007, 2:57 pm
by 93_4Banger
Exhaust coming out of the side skirt like this!!!

all comments welcome!

Image

Posted: November 3rd, 2007, 2:58 pm
by Dali
almost impossible to run it that way (not without a bunch of fab work). would be different though.

Posted: November 3rd, 2007, 3:05 pm
by 93_4Banger
i think i could run it to the passenger side easier then the driver side.

Posted: November 4th, 2007, 12:33 pm
by 10secSim
It would defenetly be easyer by the passenger side and never say impossible.

Posted: November 4th, 2007, 9:03 pm
by fischerry
it would not be that hard at all,buy the tip you want to use(slanted tip as to not ruin the skirt) and glass away make sure you leave at least a 1/4 in all the way around so it doesnt melt.shouldnt take you too long since the paint is primer.the passenger side would be a heck of alot easier but you could run dual (with a splitter or y pipe)one on each side.if i could find some reasonable skirt's locally i would do it too.

Posted: November 4th, 2007, 9:07 pm
by 10secSim
One thing I would worry about is when ever the engine moves back and forth the exhaust moves too. you might have to get or make solid mounts to help the situation and maybe put a second flex pipe just befor the the last bend and some good hangers.

Posted: November 4th, 2007, 9:44 pm
by 93_4Banger
already got the tip and the muffler i wonder where i could mount the muffler but im pretty sure it will be easy to do and cost a lot less money than if i took it to a shop!

Posted: November 7th, 2007, 1:26 pm
by delpy32
i have mine like that only out the pass side. i did it as a quik fix one time cuz i didnt have enough pipe at the time to go out the back so i put it there and its never changed...lil angled tip on the nd to run with the body and it looks pretty good. got the idea from my dirt track car

Posted: November 7th, 2007, 2:29 pm
by Custommx3
I was thinking abou tthat a few years ago, I even did a chop of it. Something like the roush mustang.

Posted: November 8th, 2007, 12:00 pm
by 93_4Banger
ya that what im going to end up doing, and the side skirt is wider than the body it should be nice looking and different which is what im going for.

Posted: November 9th, 2007, 11:37 am
by Josh
thats how i ran my exhaust for ever, rite after my AWD swap. but i did it on the passenger side. its sweet except you will always have one wheel dirtyer than the rest. I think you should Y it off and put it threw both sides that would be sweet. then top it of with some flame throwers. :lol:

Posted: November 9th, 2007, 11:53 am
by Mooneggs
Josh wrote: I think you should Y it off and put it threw both sides that would be sweet. then top it of with some flame throwers. :lol:
x2 that would rock but make sure you keep the car primed :D

Posted: November 10th, 2007, 11:04 am
by 93_4Banger
ive changed my mind i think and im just gunna run it normally, im doing this because im planning something top secret starting in spring. :D